About the video monitoring card installation steps

The development of video surveillance cards has a history of more than 10 years. From the original 98 systems to the current 2003 system, the earliest MJPEG to H.264 compression algorithms, the monitoring compression cards used are completely different. Regardless of the type of monitoring card, their installation methods are basically the same, roughly divided into the following steps:

1, select the appropriate motherboard, the card is installed in the PCI or the corresponding slot;

2, install the monitoring card driver. (Method one: Select the drive path according to the system prompts. Method two: Use the monitoring software to install the driver.)

3, install monitoring software. (Method one: copy the monitoring software directly to the local hard disk, method two: use the installation program to install.)

4, run the software. (If the software is directly copied to the local hard disk, you need to enter the main menu of the software to open the monitoring main program and use the monitoring software installed in the installation program. Usually there is a shortcut on the desktop and start menu.)

5, set monitoring video. (Usually, you need to set the recording schedule, image compression resolution, image compression detection, fixed recording, or dynamic recording mode selection. For details, refer to each monitoring software manual.)

6. Connect the video cable. (There are two kinds of monitoring card wiring, which are the BLANK interface and the BNC interface on the card.)

7, image adjustments. (In accordance with the actual mood of the video image, adjust the brightness, contrast, color saturation, etc. of each image.)

8. You're done, celebrate the celebration.

Note: The monitoring card has certain requirements for the motherboard, CPU, and power supply. Please ask for compatibility when purchasing and purchase the corresponding computer accessories according to the compatibility of each card.

Flap Disc Backing Pad

Fiberglass Backing Pad is mainly used for making flap discs, Clean And Strip Disc, wool felt disc, non woven flap discs, diamond Flap Disc and other abrasive discs

Flap disc backing pad Type: T-27 – Flat shape, T-29 – Conical or Tapered shape

Flap disc backing plate Material: Best quality fiberglass farbic, Excellent phenolic resin, Galvanized metal rings, Backing Flap disc nylon pad surface: Black paper or non-woven cloth

Advantanges:

1. All raw material are adopted with good quality, best quality fiberglass fabric, phenolic resin.

2. From 75~220mm various sepcification of fiberglass backing plate products are available here.

3. For your different requirement, we have diferent layer, shape products for your requirement.

4. Suitable for flap disc, flet disc, clean & strip disc, non-woven flap disc and so on.

Features:

1. High Quality Fiberglass Cloth with Phenolic Resin

2. High-strength fiberglass cloth with good flexibility, light-weight

3. Excellent bonding property and heat resistance

4. Strict detection, full inspection and random testing before shipping

Packing :

For regular order, we packed 100pcs/shrink and 1000pcs/carton, 30cartons on a pallet with plastic fully shrinked outside to avoid moisture.

But we can offer special packing as per customer's needs.

For fiberglass backing pad, the related products we supply is Abrasive Flap Disc , Flap Disc Adhesive , clean and strip disc, nylon fllap wheels, Bonded Abrasives , and Surface Conditioning Product, this is also our main best selling goods all over the world.

Flap Disc Backing Pad,Flap Disc Backing,Flap Disc Nylon Pad,Nylon Fiber Backing Pad,Plastic backing plate for flap disc

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com