August 14 Tianjin Construction Steel Market Price Quotes


Name of product specification Materials Steel factory / origin Today's price (yuan/ton) Yesterday's price (yuan/ton) Change (yuan/ton)
altitude Φ6.5-10mm Q235 Shougang 3710-3720 3710-3720 constant
altitude Φ6.5-10mm Q235 Tang Gang 3710-3720 3710-3720 constant
altitude Φ6.5-10mm Q235 Xuan Gang 3710-3720 3710-3720 constant
altitude Φ6.5-10mm Q235 Tian Gang 3710-3720 3710-3720 constant
Common line Φ6.5-10mm Q235 Shougang 3620-3680 3620-3680 constant
Common line Φ6.5-10mm Q235 Tang Gang 3620-3680 3620-3680 constant
Rebar Φ12-14 HRB335 Rolling II 3520-3530 3520-3530 constant
Rebar Φ16-25 HRB335 Rolling II 3510-3520 3510-3520 constant
Rebar Φ12-14 HRB335 Rolling three 3520-3530 3520-3530 constant
Rebar Φ16-25 HRB335 Rolling three 3510-3520 3510-3520 constant
Rebar Φ12-14 HRB335 Shougang 3900-3910 3900-3910 constant
Rebar Φ16-25 HRB335 Shougang 3650-3660 3650-3660 constant
Rebar Φ12-14 HRB335 Xuan Gang 3900-3910 3900-3910 constant
Rebar Φ16-25 HRB335 Xuan Gang 3650-3660 3650-3660 constant
Rebar Φ12-14 HRB335 Tang Gang 3900-3910 3900-3910 constant
Rebar Φ16-25 HRB335 Tang Gang 3650-3660 3650-3660 constant
Rebar Φ16-25 HRB335 Tiantie 3650-3660 3650-3660 constant
Rebar Φ16-25 HRB335 Cheng Gang 3650-3660 3650-3660 constant
Rebar Φ28-32 HRB335 Tang Gang 3700-3710 3700-3710 constant
Three-level disk screw Φ12-14 HRB400 Cheng Gang 4020-4030 4020-4030 constant
Three-level disk screw Φ16-25 HRB400 Cheng Gang 3800-3810 3800-3810 constant
Three-level disk screw Φ28-32 HRB400 Cheng Gang 3950-3960 3950-3960 constant
Round steel Φ12mm Q235 Rolling three 3630-3640 3630-3640 constant
Round steel Φ14mm Q235 Tong Gang 3530-3540 3530-3540 constant
Round steel Φ16-18mm Q235 Angang 3530-3540 3530-3540 constant
Round steel Φ20-22mm Q235 Angang 3530-3540 3530-3540 constant



Release Bearing

The clutch release bearing is installed between the clutch and the transmission, the release bearing seat is loosely sleeved on the tubular extension part of the bearing cover of the first shaft of the transmission, the shoulder of the release bearing is always leaning on the release fork through the return spring, and retreats to the last position, and the end of the release rod (separation finger) keeps a clearance of about 3~4mm.
Due to the clutch compression. The release lever and the engine crankshaft run synchronously, and the release fork can only move axially along the clutch output shaft, and it is obviously impossible to directly use the release fork to toggle the release rod, and by separating the bearing, the release lever can be rotated while moving along the clutch output shaft, so as to ensure that the clutch can be smoothly engaged, the separation is soft, the wear is reduced, and the service life of the clutch and the entire drive train is prolonged.
performance
The clutch release bearing should be flexible in motion, without sharp sound or jamming, its axial clearance should not exceed 0.60mm, and the inner seat wear should not exceed 0.30mm

Release Bearing,High Speed Bearings,Bearings 30306,Bearing 30213

Hebei Fangqiang bearing manufacturing Co., LTD , https://www.fangqiangbearing.com