Bending machine maintenance skills L. The bending machine designed and produced by Xinyuan Enterprise has functions such as cutting, punching, bending, leveling, embossing, crimping of cable ends, and cutting of terminal guides. Zhengzhou Xinyuan Bending Machine is widely used in cutting, blanking, punching, drawing and bending and other cold stamping work in various machinery, instrumentation, hardware, light industry, bearing, automobile and other industries. All kinds of bending machines are reasonable in design, mature in technology, advanced in structure, convenient in operation and stable in use. They meet the needs of most users, reasonable working surface layout, three independent hydraulic systems, and can be operated by three people at the same time without mutual interference. There are many molds, punching can be selected, no need for scribing proofing, round hole waist punching freely; bending can be predetermined angle, is the best choice for users.
The bending machine has the advantages of energy saving, small mechanical wear, low oil temperature and long service life. High-quality hydraulic components, easy-to-maintain systems, and operators can also be serviced. Let's talk about the maintenance skills and common sense of the bending machine that the bending machine operator can also perform maintenance.
What aspects of the bending machine need to be repaired?
Hydraulic system maintenance:
a. The new machine should be changed once in a month, and the oil should be changed once a year. Each time the oil is changed, the fuel tank should be cleaned;
b. The hydraulic oil used in the bending machine is No. 46 hydraulic oil or No. 32 hydraulic oil, which is used according to actual conditions;
c. Check the fuel tank oil level every month. If the hydraulic system is repaired, check it. The oil level should be filled with hydraulic oil below the oil window.
d. The system oil temperature should be between 35 °C and 60 °C, and should not exceed 70 °C. If it is too high, it will cause deterioration of oil quality and accessories.
e. The filter should be replaced or thoroughly cleaned every time the filter is changed;
f. The machine has other alarms such as alarms or oily impurities, which should be replaced;
g. After using the new machine for one month, check whether there is any deformation at the bend of each tubing. If there is any abnormality, it should be replaced. After two months of use, the joint of all fittings should be tightened. When this work is done, it should be shut down. pressure;
h. Clean hydraulic components (substrate, valve, motor, pump, oil pipe, etc.) every month. It is best to add a protective cover to the hydraulic system to prevent dirt from entering the system and not using detergent.
i. The air filter on the fuel tank should be inspected and cleaned every 3 months, preferably once every 1 year.
Bending machine, bending machine price concessions, bending machine manufacturers your first choice.
Looking for Zhengzhou bending machine manufacturers, we must choose Zhengzhou Xinyuan bending machine manufacturers, Zhengzhou Xinyuan bending machine is the national famous bending machine manufacturer, is the elite of Henan Zhengzhou bending machine manufacturers, smart people can understand The savvy person can see it right, and the bright person can see it far.
Zhengzhou Xinyuan brand brand bending machine manufacturers, bending machine offer, bending machine quality assurance, hydraulic bending machine, digital display bending machine, fair price, reliable quality, no one, I have excellent, in Zhengzhou Xin The source bending machine industry belongs to the famous brand bending machine. There is no best, only better.
Bending machine details after-sales center 13598863000 0371-64319672 0371-64319808
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Led Surface Down Light,Square Surface Fixed Down Light,Led Square Surface Fixed Spot Light,Led Round Surface Mounted Light
Foshan Brinno Technology Co.,Ltd , https://www.brinnolighting.com