Nowadays, when people choose furniture, they not only value its practicality, but also consider whether it can match the overall style of the home. Xiaoxian learned that there are only two ways for owners to choose furniture: one is made on-site by a carpenter, and the other is to buy finished products. Choosing woodworking to build furniture on site, friends can see the whole process of building, and can also control the shape and style of furniture according to their preferences. The finished furniture purchased is more beautiful, and the price varies from one thing to another. I won't say much about the advantages of both sides. Here I mainly dig out their respective defects.
Carpenter builds a home with "cat greasy"
Mr. Jiang bought a new house of 100 square meters in a residential area of ​​Shangqiu City. After the carpentry was done, he was depressed.
"In the decoration process, only the carpenter was looking for the decoration company. I didn't expect to be pitted." In order to save money for decoration, Mr. Jiang always worked in person during the decoration process, looking for workers to buy building materials. Because carpentry is a big project and he doesn't understand the doorway at all, he found two carpenters through a decoration company in Shangqiu.
"The designer's initial quotation was very low. I didn't expect that the final settlement was nearly double the budget." Mr. Jiang originally wanted to make woodworkers with wooden keel ceilings, but the decoration company told him that furniture made by woodworkers is not only practical, but also It can also be much cheaper than buying a finished product. Mr. Jiang was so excited that he made wardrobes, cabinets, TV cabinets and other furniture on the advice of carpenters. During carpentry, in addition to picking the plates with the carpentry master, you also have to buy hardware, wood lacquer, wires and other materials for woodworking.
"The master carpenter asked me to design by myself. He just built it according to my ideas." Mr. Jiang said that he recognized the high cost of errands and manual work, but the decoration company did not give design drawings, and Mr. Jiang who knew nothing could only work in woodworking Under the guidance of the master, he acts as a designer himself. In the end, the ceilings were done in vulgar terms, and the workmanship of some furniture was rough and ugly.
Xiaoxian also learned that at present, Shangqiu City decoration companies are mixed with fish and dragons, and even some unscrupulous decoration companies will cut corners and substitute, and even let woodworkers create furniture and words such as "old soil" and "pit people". Connected.
The price of finished furniture is "fatty"
The reason why the owner struggles to buy the finished furniture: first, the price, and second, the quality. Since many furniture merchants in Shangqiu are concentrated in unified markets such as furniture cities and home stores, product quality concerns can be temporarily ignored, so the only reason that affects the owner's purchase of furniture is the price.
As we all know, if you only look at the price of furniture businesses, it is estimated that you will go after reading! Xiaoxian secretly told you that the practice of the furniture industry sales is actually "high price, high discount." Normal store discounts are generally 40% to 20% off. If you participate in a group purchase event or the like, the price may fall below 50%. The difference between them is very impressive. Price.
In addition to the price, the owners have the most headaches in the choice of furniture. Most of the current decoration companies are only responsible for hard-wearing. What kind of sofas to buy and what kind of dining tables and chairs to be furnished by the owner must be treasured in the ocean of many types of furniture. If you have a choice phobia, it is even more headache!
The warm-up match-finding competition is over, and the PK competition for carpentry building and finished furniture has officially started!
ã€Home Improvement PK】
first round
Price: Carpentry wins
From the perspective of cost savings, carpentry building furniture is relatively cost-effective than buying finished products, but the premise is that you have to ask the cost and labor costs clearly. The price of finished furniture is relatively high, because it not only has production costs, but also includes marketing costs and brand added value. Therefore, in terms of price, the woodworking site wins!
second round
Appearance: Finished furniture wins
Most of the furniture made by carpentry is not as good as the finished furniture. Regardless of the surface treatment or various construction techniques, the limitations of the carpentry site are relatively large. After all, the construction site is not as well equipped as the factory. Finished furniture has its own factory, with a complete set of facilities and production process, the furniture produced is more beautiful in appearance.
Round three
Environmental protection: draw
Most of the finished furniture can meet the relevant national standards in terms of environmental protection. The only problem is that the materials used in furniture products can only listen to the words of the merchants. You ca n’t just take apart the new furniture you just bought and take a look? This process occupies a large proportion. Building furniture on the carpentry site allows the owner to clearly see the materials used in each process, from plates and decorative panels to paint and putty. All the materials can be monitored by the owner himself, so it goes without saying that the environmental performance is natural. This time the two sides are tied!
Round four
Product performance: Carpentry builds a small win
The product performance of finished furniture depends more on the integrity of the brand, and you must pay attention to the brand when choosing finished furniture. The furniture made on the site of the carpentry is more reliable in terms of product performance. Anyway, it is purely hand-made, not as expensive as the finished furniture! So this round, the furniture made by the carpenter won by a slight advantage.
In summary, it can be seen that carpentry is more cost-effective to build furniture than to buy finished furniture. Of course, the bargain here is relative! If you encounter Mr. Jiang's situation, it is estimated that no matter how much money you save, you are not happy. Woodworking makes furniture cheaper, but it takes the owner to bother, so young owners who want to make it convenient should think about it.
Weapon
After the completion of the woodworking inspection strategy:
Look at the gap: solid wood sealing line, corner line, waist line decorative panel touch seam does not exceed 0.2mm, line and line clamp angle seam does not exceed 0.3mm, decorative panel and board touch seam does not exceed 0.2mm, sliding door overall error Does not exceed 0.3mm.
Look at the structure: whether the structure is straight or flat. Regardless of the horizontal or vertical direction, the correct carpentry practices should be straight and flat.
Look at the corner: Whether the corner is accurate. Normal corners are all 90 degrees, except for special design factors.
Look at the parquet: Whether the parquet is tight and accurate. The correct wooden parquet needs to be seamless with each other or maintain a uniform separation distance.
Look at the radian: whether the radian and roundness are smooth and round. In addition to a single, multiple same shape must also ensure the consistency of the shape.
Look at the cabinet door: whether the cabinet door switch is normal. When the cabinet door is opened, the operation should be light and no abnormal noise.
Look flat: Make sure that the surface of the woodwork project is flat, without drums or breaks.
Look at symmetry: whether symmetry woodwork projects are symmetrical.
Tips for buying finished furniture:
1. Fully understand the style of home improvement design, it is best to have a designer as a home consultant. Designers can be invited to accompany the purchase, because most businesses will give designers a "concession".
2. Choose the right buying opportunity, such as group buying, discount promotion and other activities. Although group purchases are greasy, some goods are still cheaper than those you buy in stores.
3. Must adhere to the principles of application. The furniture itself is not the best. If you have a limited budget, you may wish to run a few more furniture cities to pick out the most suitable for your own decoration style.
4. Adhere to the principle of "cutting the waist" and bargaining. If it is not a very well-known brand, you may wish to "cut the waist" first when bargaining, and try to make your best bargaining level.
Each type of helical insert is designed for different applications. Free-running helical coils, for example, are extremely flexible inserts designed so that each coil in the helical insert can independently adjust to the fastener threads.
Free Running Tangless Insert,Free Running Coil Threaded Insert,Tangless Free Running Insert,Free Running Insert Without Tang
Shenyang Helisert Technology Co., Ltd , https://www.helisert.com