There are many kinds of coatings . What kind of coatings do our friends often use, do you know this chlorinated rubber anticorrosive coating ? What kind of special coating is chlorinated rubber anticorrosive coating, chlorinated rubber anticorrosive coating has Many advantages and benefits, everyone can not be very clear, some correct use of chlorinated rubber anti-corrosion coatings and chlorinated rubber anti-corrosion coatings, I will introduce you to Xiaobian.
First, the advantages of chlorinated rubber anti-corrosion coating
1. General anti-corrosion coatings are used under very severe conditions, and have a good life expectancy for production and sales. Even in the chemical plant and deep sea environment, heavy anti-corrosion coatings can be used for 10 or more years.
2. Moreover, it is convenient to use when using anti-corrosion coating. It can realize the self-curing of inorganic coating at room temperature. When the ambient temperature is 20 °C and the relative humidity is less than 85%, the surface time is about 15 minutes. Drying is about two hours and can guarantee efficient construction.
3. Moreover, the anti-corrosion coating is resistant to salt spray, and the aging resistance is also good, and the coating has good self-healing property. After the local scratch caused by external force, the protective coating can be protected from cutting and welding damage, and the coating is welded. It does not affect the quality of the weld. Instead, the method used is flexible and environmentally friendly.
Second, the method of use
1. Make sure the painted surface is smooth and sanded with a comparable amount of sandpaper.
2. Feel the consistency of the primer according to the density of the painted surface. If the density is high, the paint needs to be diluted. If the density is low, then you need to adjust the viscosity.
3. When painting, it should be evenly coated along the texture of the wood. Avoid excessive thickness. After it is completely dry, sand it with sandpaper until it feels smooth and no protrusions. Wipe it with a damp soft cloth several times and finally dry it.
4. Brush the paint a second time to cover the first coat, then sand the paper gently and evenly along the direction of the paint.
5. Brush the third time of the paint, brush it with a finer water sandpaper, and do not rub it too hard.
Third, matters needing attention
1. Dark paint should not be mixed with water, otherwise it will be easy to appear chromatic aberration; lacquering is best done in one time, otherwise it is prone to chromatic aberration.
2. Do not paint in wet weather or winter, otherwise it will affect the overall construction quality and the paint will not dry easily.
3. Pay attention to indoor ventilation and heat dissipation, and the polishing of paint and paint should be carried out after completely drying out.
4. When the brush is finished waiting for drying, soak in the water, optimistic about the brush where there are no bubbles, if there is a bubble, immediately break.
5. When the brush is stained with paint, the part of the brush that is immersed in the paint should not exceed half of the length of the hair. If the root of the brush is painted, the paint brush will be deformed and the service life of the paint brush will be shortened.
6. Paint brush with paint must be gently wiped on the inner surface of the container before brushing to remove excess paint to prevent the paint from dripping on the ground.
Chlorinated rubber anti-corrosion coating is a simple construction advantage and many good coatings have been learned for the use of this chlorinated rubber anti-corrosion coating. Our chlorinated rubber anti-corrosion coatings have certain precautions. We all know more about our The decoration home network will continue to bring new decoration information to friends, so stay tuned.
More related wonderful reading:
What is anticorrosive paint? Anticorrosive coating introduction
What is the steel structure anti-corrosion coating? The use of steel structure anti-corrosion coating
How about anti-corrosion coating? What is the principle of anti-corrosion coating?
What is anti-corrosion coating? What are the types of anti-corrosion coatings?
Coil Nails
Coiled nails refer to nails which are assembled together in coils by steel wires, hence the name wire Collated Nails. Main types include coiled smooth shank nails, coiled ring shank nails and coiled screw nails. These wire-collated coiled nails are compatible with pneumatic wire coil framing nailers. In this way, workers can do their jobs more efficiently and perfectly. Main application fields include binding of pallet & crate, fencing, garden furniture and external cladding fixation, etc.
Coil Nails,Smooth Type Coil Nails,Galvanized Coil Nails,Ring Shank Coil Nails
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.ironnailwiremesh.com