Cleverly change the lathe milling oil tank

The air compressor connecting rod copper sleeve (Fig. 1) processed by our factory has 4 oil grooves in the inner hole. In the original small batch production, the oil groove was pulled out on the lathe with a bore cutter. The four oil grooves pulled out were difficult to be evenly distributed, and the surface roughness did not meet the requirements of the drawings, which was laborious and time consuming. Later, we improved the processing technology and adopted the lathe milling oil tank. The specific method: in the CA6150 lathe, remove the small carriage and the tool holder, install an indexing head, and adjust the points through the backing plate.

Electric Retractable Gate

It can be equipped with a scrolling display that displays 300-500 words of display content. It can also be equipped with intelligent infrared probe anti-collision device, which can automatically return to work when people or foreign objects are 20-30CM, thus ensuring the safety of vehicles and pedestrians.It can automatically open and close when automatic clutch is cut off. Manually open and close when manual clutch is cut off. The control system has control panel, push button switch, and other requirements. Equipped with wireless remote control.The door body is made of high-quality stainless steel and aluminum alloy profiles, and is hinged by the parallelogram principle. The drive is driven by special motor, worm and worm gear deceleration, and has automatic clutch or manual clutch.

Factory Sliding Retractable Gate,Aluminum Alloy School Sliding Gate,Automatic Electric Single Double Gate,Store Retractable Gate

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com