Computer car complete set of perfect cleaning and maintenance
Dongguan Yuanyang Sewing Machinery Co., Ltd. expert tips:
The use of the computer pattern machine should be cleaned and lubricated to ensure the normal operation of the computer pattern machine.
the first. Refueling of the bag sewing machine You must use special sewing machine oil. The computer pattern machine should be fully oiled once after one or several days of continuous use. If it is refueled between uses, the machine should be idling for one revolution, so that the oil is fully infiltrated and the excess oil is removed, and then a clean soft cloth will be used. Wipe the machine head and table top to avoid staining the sewing material. Then thread the quilted rag, use the movement of the sewing thread to wipe out the excess oil traces, until there is no oil on the rag, and then make the formal sewing. The refueling parts of the computer pattern machine are:
(1). Each oil hole on the machine head lubricates the upper shaft and the parts connected to the upper shaft.
(2). The components inside the panel and the moving parts connected to each component. Lubricate the presser bar and the needle bar and the components connected to it.
(3). Wipe off the activity of the lower part of the machine and add less oil. It is not necessary to add too much oil to each of the oiling holes and the fueling parts. One or two drops are sufficient.
Secondly, the following points should be noted when maintaining the computer needle car:
(1). After the work is finished, insert the needle into the pinhole plate, lift the presser foot, and cover the machine head with the machine cover to invade the dust.
(2). When starting work, first check the main parts, how to deal with the light and heavy conditions, whether there is any special sound, whether the needle is normal, etc. If abnormal phenomena are found, it should be repaired in time.
(3). After the machine has been used for a long time, it is necessary to carry out an overhaul. If it is found that the parts are worn out, it is necessary to replace it with new ones.
second. Computer car cleaning
1. Cleaning the feed dog Remove the screw between the needle plate and the feed dog, remove the cloth and dust, and add a small amount of sewing machine oil.
2. The cleaning of the shuttle bed is the core of the work of the container bag sewing machine, and it is also the most prone to faults. Therefore, always remove dirt and add a small amount of sewing machine oil.
3. Cleaning the surface of other parts of the sewing machine and all parts of the panel should be cleaned frequently.
Http://news.chinawj.com.cn Submission:
SAD Therapy Lamp, SAD therapy light box, daylight therapy lamp
Rectangle Sad Therapy Lamp,Therapy Light For Sad,Daylight Therapy Lamp,Sad Therapy Light Box
Guangdong Jishengke Industrial Co., Ltd. , https://www.suronart.com