The so-called panel furniture refers to the furniture made by the process of surface veneering by medium density fiberboard or particle board. The current veneer of plate furniture is more and more realistic, and the gloss and feel are all good, occupying an important position in the furniture market. There was a saying among women, "No ugly woman, only lazy woman." The panel furniture looks beautiful and comfortable again, and the lack of daily cleaning and maintenance will eventually be "the old man." The question is, what are the cleaning and maintenance techniques for panel furniture?
Plate furniture should not be dry, so the panel furniture should not be particularly exposed, do not put the furniture directly on the heating furnace, fireplace, and other high temperature; placed in the room should be away from the door, window, air outlet and other parts of the strong air flow, avoid Air conditioning blows against the furniture. Plate furniture should be moderate in size. Store objects inside the cabinet and do not exceed the door frame. If hard squeezing hard plugs will cause deformation of the cabinet doors, furniture doors and drawers should avoid being deformed by clothing and other extrusions. Plate furniture is generally used for a long period of time, so it is usually necessary to protect the surface coating of furniture. It is better to wipe it once every three months with a little wax, not only to increase the appearance of furniture, but also to protect wood.
Keep the furniture tidy and clean with daily clean gauze. Chemical brighteners should not be used to prevent the paint film from being damaged. In order to maintain the brightness of the furniture paint film, walnuts can be crushed, peeled, and then polished with three layers of gauze. In order to protect the paint film from being scratched and to display the wood texture, the panel of the board type furniture is generally placed on the countertop with a thick glass plate separated by a small suction pad between the glass plate and the wooden table top. It is recommended not to use transparent polyethylene crystal plate. Placement must be done using square roots. The force direction of the legs of the furniture should be consistent with the gravity. Do not tilt. Use foot pads to adjust.
When handling or moving furniture, handle it gently and gently. Do not pull it hard. Doing so may damage the structure and cause looseness of the overall structure of the furniture. Tables and chairs can't be lifted up and fall off easily. They should be lifted from both sides of the table and under the chairs. The cabinets are better to remove the doors and lift them, which can reduce the weight and also avoid the door movements. If you need to move a particularly heavy piece of furniture, you can use a soft rope to slide it under the furniture chassis and lift it. Prevent alcohol, banana water and other solvents from overturning. Otherwise it will make the furniture surface "scarred." When you encounter dirt on the surface of the furniture, wash it with mild soapy water, dry it, and wax it again to restore the original appearance. However, do not wipe it with solvent liquids such as gasoline, kerosene, and turpentine, otherwise the surface will be wiped off. The gloss of the paint and paint.
Walnut oil used for furniture maintenance is only suitable for furniture that is not painted and treated by waxing. Use frequency should not be too high, under normal circumstances, 2 to 3 months can be used once, in a relatively dry environment can properly shorten the maintenance interval, a month or so maintenance. It should also be reminded that although walnut oil can be "dried," it must be used in normal use. The oil has the property of vacuuming. Too much dust will make the dust adhere and produce a greasy feeling. The wax can be simply wiped (solvent beeswax dissolved in solvent, or moderately heated to melt) to care for the furniture, especially on the back of the panel furniture. Pay attention to the amount of less, the number of fewer, only wiping the back of the furniture, the bottom, do not rub the front, moderate moisture to the furniture closed.
Dust is actually a kind of abrasive particles. When wiping the dust, use a soft cotton cloth to wipe back and forth along the grain. If you use a hard dry cloth to wipe the paint, it will cause grind to the paint surface and make it lose its luster. Can imitate the ancients with cloth (preferably do not use chemical fiber fabrics) wrapped walnut crushing, the effect is also very good. In the end, it is necessary to maintain the indoor humidity and not let the furniture get wet. In the spring and autumn, humidifiers should be used for a limited time to prevent furniture from being damaged due to excessive humidity, such as decay of wood, corrosion of metal parts, and easy detachment of glue from the bonded parts. Usually, the furniture should be cleaned with as little water as possible, and alkali water should be avoided. Only use a damp cloth that has been wrung with water, and wipe it with a dry cloth.
Panel Furniture Furniture Maintenance
Temporary Fence,Pvc Portable Fence,Pvc Temporary Fence,Security Construction Fence
HeBei Bosen Metal Products Co.,Ltd , https://www.bosenfence.com