The primary basis for elevator power distribution design should be the elevator manufacturer sample, or refer to the industrial and civil power distribution design manual.
The elevator power distribution manual is also described in detail, mainly referring to the following points:
1. The elevator load grading should conform to the specification, and it is judged whether it belongs to the primary load or the secondary load according to the specification.
2. Separate isolation and protection appliances should be installed in each elevator.
3. The lighting and ventilation in the elevator car and the power socket of the elevator car and the power cord of the alarm device need to be provided with separate electrical appliances and protective appliances. The power supply can be obtained from the main power switch of the elevator.
4, the machine room with multiple loops into the line, each circuit should be provided with isolation appliances.
5. The power distribution box should be located in the equipment room for maintenance and operation, and the backup power supply should be set in the box.
6. The lighting and socket lines of the elevator engine room and the pulley room, the elevator shaft and the pit should be distributed separately from the elevator.
7. It is recommended in the drawings that the load must be confirmed by the elevator manufacturer to meet the equipment requirements before construction.
The conductive Pipette Tips are specially designed for automatic workstations and are made of medical grade conductive polypropylene (PP) material, and the tips are conductive. After the conductive tip is adapted to a specific automatic pipetting workstation, it can detect the liquid level, making the automatic sample addition more intelligent and precise.
Transparent automatic Pipette tips can also be called robotic pipette tips or micro tips; Yongyue Medical's pipette tips have been sterilized and are packaged with 96 pieces per box, which is easy to carry and operation; compatible for Beckman, Tecan, Rainin to achieve automatic pipetting performance and ensure the consistency of pipetting.
The robotic tip is made of imported polypropylene (PP) material, with high transparency. The surface is treated with a special process and has super-hydrophobicity to ensure the accuracy of experimental data. The product is automatically produced in a 100,000-level purification workshop, free of DNase, RNase, and pyrogen-free.
pipette tips 10 ml,20 ul pipette tips,5 ml pipette tips, 200 ul pipette tips
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedical.com