Eliminate the occurrence of these ten phenomena and cut corners and materials will die

Why does the decoration company do decoration for you? Because you gave the money. Why the owners have given money, decoration companies have added items and other tricks? Because I want to make more money. All the world's hee hee is profit to the world. It is precisely because of this "profit" that many decoration companies have used unfair methods and cutting corners is one of the common ones. Some people will ask third-party supervisors to supervise, but this adds another amount of expenses. Want to not spend money, but also to prevent cutting corners? As a landlord, you must ensure that the ten major jerry-building cuts in the decoration do not occur.

The phenomenon of cutting corners: The visible paint on the wall

Latex paint is the most common wall decoration material at present. In concrete construction, it can be painted, rolled or sprayed. For interior wall decoration of a room, generally latex paint needs to be painted twice or more to be qualified. If the workers are not serious or perfunctory during the construction, there will often be color differences, especially with darker emulsion paints. Latex paints need to be filled with a certain amount of water before use, and the latex paint must be used up once. Paints of the same color are also best painted once. If the wall needs to be repaired after construction, the whole wall should be repainted again.

The phenomenon of cutting corners and two things: The quality of the foundation is not perfect

Phenomenon: Before painting latex paint and paving the wall and floor tiles, we must do a good job on the surface treatment of the wall or the ground. For the new house, the substrate treatment generally only needs to be polished with coarse sandpaper, and it is not necessary to eradicate the original paint layer. However, the walls of ordinary old houses need to be removed before the next process can be carried out. Some workers, due to the lack of knowledge of the householder about the knowledge in this area, are cutting corners in this area during construction. The consequences of this situation are that unevenness of the wall is caused, there is a color difference after the paint is applied, and the emulsion paint is discolored. Cracks or even peeling, or tiles stuck loosely.

Reminder: In the paving construction of tiles, you should pay attention that the tiles can not be directly laid on the surface of lime mortar, lime paste, paper lime plaster, hemp stone mortar and latex paint. layout. Bonding pastes used between tiles and substrates should be formulated in strict accordance with the construction standards and proportions, using the specified grades of cement and adhesive materials, and they cannot be randomly deployed. When applying latex paint, you must pay attention to whether the shading of the wall putty is even and smooth, whether the sanding and rolling are in place. In addition, you should pay attention to whether the latex paint is properly proportioned and whether there is excessive water.

Stealing and reducing the phenomenon of three: circuit wiring and serious harm to safety

Phenomenon: This is also a very stealthy jerry, usually after the completion of the renovation, after the completion of the renovation, consumers in the use of electrical appliances, especially some of the more power-hungry water heaters, air conditioners, etc., switch, socket fever Even burned, some inexperienced consumers often think that this is caused by high-power electrical appliances. Actually, this is not the case. In such a situation, it is very likely that electricians do not follow construction requirements when installing sockets, switches and lamps. Caused by wiring.

Reminder: The use of high-power electrical appliances and air conditioners is unavoidable. Therefore, construction must be supervised by electricians in strict accordance with the operating procedures. After all switches and sockets are installed, they must be used for practical purposes. There is a fever phenomenon to prevent unnecessary losses during the subsequent use of electrical appliances.

Decoration tricks common means of cutting corners

1 23 Next> Total 3 Pages
Page to page
Function assignPage() { var page = $('#page_val').val(); if (/_\d+\.html$/.test(location.href)) { location.href = location.href.replace( /_\d+\.html/, ((page == 1) && 1? '' : '_' + page) + '.html') } else if(/\/\d+\.html$/.test (location.href)) { location.href = location.href.replace(/(\d+)\.html/, ((page == 1) && 1? '$1' :'$1_' + page) + ' .html') } } $(function(){ $('#page_form').submit(function() { assignPage() return false; }) $('#page_btn').click(function(){ assignPage( ); return false; }) }) See full story

Kitchen Faucet Spray Head

Kitchen Faucet Spray Head,Kitchen Faucet With Pull-Out Spray,Pull-Out Spray Faucet,Sink Spout Pull Down Spray Head

ASHOWER , https://www.ashower.com