Embossing floor process practice analysis
The stamping floor is called a stamper floor, an embossed floor, a printing floor, etc. The different names are also different. It is a special wear-resistant mineral aggregate, high-grade cement, inorganic pigments and Polymer additive synthetic colored ground hardener. Then through the molding process, finishing, sealing and other construction processes make the concrete surface with extraordinary stone texture and rich color effects. The following Liaoning Plinde will take you to understand the detailed construction process of the stamping floor.
Imprint floor process practices:
1. The strength of the basement crucible should be ≤ c25, the water-cement ratio should be as small as possible, and the early strength agent should not be contained in the crucible.
2. The largest particle size of the aggregate in the concrete is ≤ 30mm, and the base surface layer must be covered with a cement mortar layer with crushed stone aggregate grain size ≤ 15mm and thickness ≥ 10mm.
3. The slump of concrete should be controlled at 3-4cm, and the slump of commercial concrete should be controlled at 12-14cm.
4. The gravel and prime ground must be compacted or compacted by a roller compactor.
5. Vibrators for concrete vibrators less than 10 cm use a vibratory plate vibrator to vibrate and vibrate, and more than 10 cm in concrete use vibratory vibratory inserts.
6 Use a heavier steel long roll (steel roll should be wider than the template 0.3 meters) repeatedly roll platform repeatedly to make the platform level. When rolling the platform, remove foreign objects from the steel roller. The concrete slurry is raised to ensure that the surface is free of gravel. If the steel roller cannot be used in the operation, the model should be used to scrape the floor level.
7 When the level of the concrete platform is completed, it shall be treated with bleeding water.
8Requires the gradation of the bottom concrete to be c25 or c20, the upper layer is c30 or c25 mortar fine stone concrete, the total thickness is 5-20cm
Liaoning Plinde has been engaged in the flooring industry for more than ten years and has been a leading brand in the domestic industry. Hundreds of engineering cases are spread all over the country. Liaoning Plinder has a strong presence in Hebei, Shanghai, Liaoning, Gansu, Sichuan, Hunan and Tianjin. It has convenient facilities for customers to deliver goods nearby, save time and freight. Liaoning Plinde saves you every penny. Contact phone manager Zhang
Basin Faucet,Face Basin Faucet,Basin Sink Faucet,Hot And Cold Basin Taps
AIHUI Sanitary Ware , https://www.fsaihuisanitary.com