Household dehumidifiers buy maintenance tips and wet say goodbye

After the consternation, the temperature gradually picked up, and the pace of spring was getting closer and closer. However, for the small partners in the south, in March and April, it was the time when the weather in Nantian was prevailing. The biggest problem in the South Tianri was the dampness in the room. It is always wet, and the wet environment not only damages the home but also poses a threat to human health. At this time, only a dehumidifier is needed to help! In this issue, Xiao Bian will introduce to you in detail how to purchase the dehumidifier, as well as maintenance tips. Learn about it together.

A dehumidifier purchase tips

1, the environmental humidity determines the dehumidifier power

The dehumidifying power is not as great as possible. If the air in the living area is not sufficiently humid, the dehumidifier cannot achieve the declared effect. Xiao Bian suggested that it is better to choose according to the degree of wetting in the living area and the size of the space. The more humid the place of residence, the greater the amount of dehumidification capacity needed.

If you live in a very humid area and you often feel that the floor is wet or there are drops of water on the ceiling, you can choose a model with a strong dehumidification capacity.

2, according to the size of the room to buy

As with anything else, dehumidifiers need to be tailored. Dehumidifiers that are too small will overload the dehumidifiers and dehumidifiers will consume more electricity. Do not buy dehumidifiers with insufficient capacity and do not use small rooms. With a good dehumidifier, everything is bought on demand.

In general, a room of 1 square meter has a daily dehumidification volume of about 1 litre, and a 50 square meter room has 5 liters. The dehumidification capacity is 18 liters (9 liters) and it is suitable for families with 60-80 square meters.

3, dehumidifier noise can not be ignored

In general, compressor-type dehumidification opportunities have the sound of compressor operation, especially early products. However, great improvements have now been made and the noise has been suppressed. Like Yadu C181BHJ, due to the use of military compression technology introduced from Denmark, the noise was controlled below 48 decibels, and it will not affect rest. However, at the time of purchase, it is more practical to experience it on the spot.

4, save money is the last word

Under normal circumstances, the greater the dehumidifier dehumidifier power consumption is greater, only to buy the right product, in order to better save electricity.

5, to have brand awareness do not buy miscellaneous goods

The brand is directly related to the pros and cons of the product. The consequences of the inferior product are unimaginable. Once the dehumidifier has gone out of flame, it is still more appropriate to buy a well-known brand. In addition, after-sales service should also be considered, some no-name manufacturers only care about selling products, there is no after-sales commitment, consumers' rights and interests can not be guaranteed.

dehumidifier

1 2 Next> Total 2 Page
Page to page
Function assignPage() { var page = $('#page_val').val(); if (/_\d+\.html$/.test(location.href)) { location.href = location.href.replace( /_\d+\.html/, ((page == 1) && 1? '' : '_' + page) + '.html') } else if(/\/\d+\.html$/.test (location.href)) { location.href = location.href.replace(/(\d+)\.html/, ((page == 1) && 1? '$1' :'$1_' + page) + ' .html') } } $(function(){ $('#page_form').submit(function() { assignPage() return false; }) $('#page_btn').click(function(){ assignPage( ); return false; }) }) See full story

Center Drill Bit

Center Drill Bit is also known as Slocombe Drills, Centre Drills were originally designed to create the countersink required to locate a tailstock centre when turning between centres. They have a point angle of 60° to match the angle of a Tailstock Centre.
A Centre Drill can also be used to provide a start location for a drill when drilling down the centre of a bar held in a Lathe chuck. Centre Drills are short and rigid enough to mark the bar centre without wandering off if they are carefully offered up to a rotating work-piece.

DSC_5612DSC_5613

Carbide Center Drills,Hardware Tool Step Drill Bit,Wooden Box Packed Drill,Hss Center Drill Set

Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com