How can KOYO bearings use their talents to maximize their life?

Source: China Bearing Network Time: 2014-05-10

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

It is very important to insist on KOYO bearings and smooth and clean.
Before the inspection, the external appearance of the sanitary machine must be taken; then the parts around the KOYO bearing are disassembled. The oil seal is a very weak part; therefore, it is necessary to take care to disassemble it; do not apply excessive force; then carefully look at the oil seal and its surrounding parts; When it shows bad performance; it must be replaced; bad oil seal will lead to damage of imported KOYO bearings and strict equipment stop.
Cover the exposed KOYO bearings:
When looking at KOYO bearings; do not let KOYO bearings be exposed to contaminants or moisture. If the work is stopped, the machine should be covered with oil-paper plastic sheets or similar materials.
If the unobstructed KOYO bearing is removed without having to disassemble it; remove it with a white spirit with a brush for application; then dry it with a lint-free cloth or use compressed air. Blow dry (pay attention not to let the KOYO bearing assembly start to rotate).
View the smoothing agent:
Apply a little smoothing agent to the conflict between the two fingers; if there is a contaminant, feel it; or apply a thin layer of smoothing agent on the back of the hand; then seal it.
Replace the smoothing agent:
The KOYO bearing with smooth oil is after the old oil is drained; if possible, refill the fresh oil and let the machine rotate at low speed for a few minutes. The oil can collect the residual pollutants; then drain the oil; The best filter before use.
The grease smoothing KOYO bearing used in the replacement of grease should be prevented from having a cotton joint to any part of the KOYO bearing; because these residual fibers can be wedged between the rolling elements and form damage In particular, the use of small KOYO bearings needs to pay more attention to this problem.

Recommend to friends comments close window

Bearing related knowledge

Linear bearing LM and LME code base meaning the use of magnetic bearings
FAG bearing protection and maintenance methods
NSK linear bearing application method and attention to the impact of bearing grease injection on the bearing

This article links to http://
Please indicate the bearing network http://

Previous: Bearing application matters and cooperation Next: purchase imported bearing elements and bearing selection methods

Smart Ceiling Light

Smart Ceiling Light,Smart Corner Light,Corner Smart Light,Smart Led Corner Lamp

Guangdong Smart Street Lighting Co., Ltd , https://www.gdfldlight.com