The correct installation of the pump in order to pump the normal operation of the pump in different circumstances, the installation of different requirements, and now to introduce the IHF-lined fluorine plastic centrifugal pump in different working conditions Under the installation diagram. IHF-lined fluorine plastic centrifugal pump IHF-lined fluorine plastic centrifugal pump four kinds of work Installation diagram A, the high slot positive pressure state Features Description: The pump installed in the bottom of the tank, tank medium in a positive pressure state, the pump inlet When the valve is open, the fluid in the reservoir flows freely into the pump chamber, which is the ideal way to install the IHF centrifugal pump. B, the negative pressure tank state Features: Pump installed at the bottom of the tank, closed tank in a negative pressure state. This state of the pump, you must find out the exact negative pressure tank data, and then contact me , Before setting. C, low trough not bottled equipment installed Siphon barrel state characteristics Description: The pump installed in the upper tank, the inlet pipe near the pump inlet to install a self-priming pump suction siphon barrel, the pump before the siphon bucket to be filled liquid. Siphon bucket production can be selected according to the different media of the appropriate materials and manufacturing processes, production requirements siphon bucket is better sealing, must not leak leakage, please consult the green ring technician. D, Bottom Slot Bottom Valve Status Characteristics Description: The pump is installed in the upper part of the storage tank. The bottom of the inlet pipe needs to be installed with a bottom valve. Before starting the pump, check whether there is a full liquid in the pump chamber. If not, The pump cavity filled with liquid, must not be empty car, the general choice of this installation conditions, the user needs to be equipped with a pump inlet diameter as the size of the acid-resistant end valve (I can provide this type of valve at the end). Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)
NINGBO LONGFLIGHT INTELLIGENT TECHNOLOGY CO.,LTD , https://www.long-flight.com