In modern home improvement, flooring is essential for home improvement. The floor has a unique texture and color. Compared to chilled tiles, it gives people a more natural, soft and rich texture. However, at the same time, the floor also has problems such as wear, deformation and cracking. Therefore, floor waxing is an indispensable method to extend the service life of the floor. Here we introduce: indoor floor waxing maintenance process and floor waxing maintenance errors.
Indoor floor waxing maintenance process:
1, waxing environment preparation
The best choice for floor waxing is when the weather is better, such as this cool autumn day. To avoid construction when the humidity is high on rainy days and when the temperature is low, excessively high humidity tends to cause white turbidity, and when the temperature is lower than 5 degrees Celsius, floor waxes tend to harden, which is not conducive to construction.
2, construction tools and floor wax preparation
Large area waxing often use waxing machine, small area is the use of dust or soft cloth. Now many people also have smaller, lighter weight waxers that can be easily used when waxing. If you do not have a waxing machine, you can use a simple tool such as dust and soft cloth. Do not look at the tool is simple, but the waxing effect is not necessarily poor, but may be more detailed. In addition, the corresponding floor wax must be prepared.
3, clean the ground
Before you start waxing, you need to arrange the furniture that needs to be waxed and determine the waxing area. At the same time, the floor area should be cleaned to ensure that there is no dust or other dirt before waxing to prevent waxing. Cleaning generally uses a wrung mop or a soft cloth to wipe the floor. After cleaning, it is necessary to wait until the water on the floor is completely dry before waxing.
4, waxing
Shake the container with the floor wax and stir it evenly. Use a clean rag or sponge to fully dip the floor wax so that it does not drip. Shake and mix evenly the floor wax. You can perform partial trials in unobtrusive places and confirm that there is no abnormality before waxing. Then use a clean rag or special waxing dust to fully dip the wood floor wax and carefully apply it in the direction of the wood grain of the wooden floor. The speed should not be too fast. Do not apply paint or uneven thickness and keep it thin and even. The floor waxing conservation misunderstanding
5, polishing
It is generally used twice, after the first pass, and then again. Each time the wax is applied, it must wait for a layer of wax to dry before it can be applied with a layer of wax. After completely drying, polish the surface with a fine sandpaper or a soft cloth.
Floor waxing maintenance errors:
1: strengthen the floor does not need to wax
The laminate flooring is divided into a surface wear layer, a base layer, and a bottom three-layer structure. The surface wear layer is aluminum trioxide, which has high wear resistance and protection. Therefore, compared to other floors such as solid wood, it strengthens the floor. The protection of the surface itself is more stringent and does not require "multiple action." After waxing, it caused greater trouble for the cleaning of the laminate floor. In addition, there is no need for waxing on floors that are floor-heated to prevent the wax layer from blocking the warm, hot emissions.
2: The waxing of the floor is not as good as possible
Waxing on the floor is not the use of more wax, the better, because if you use too much wax, it will fill gaps affect the appearance, but also cause uneven polishing, affecting the floor brightness. Therefore, when waxing the floor, the wax can cover the surface of the floor to form a uniform wax film. In addition, the floor waxing is not as frequent as possible, the general solid wood floor can be played once every six months.
Editor's summary: The process of indoor floor waxing maintenance and floor waxing maintenance mistakes are introduced here. I hope to help you. For more information, please pay attention to this site.
Waxing on the floor
Wrench Tools,Cordless Grinding Tools,Electric Grinder Tool,Angle Grinder Machine
ZHENGYANG TECHNOLOGY CO.,LTD , https://www.supraone.com