The design steps of the mold template are as follows:
A. Analyze and understand the design intent, structural characteristics and technical requirements of the mold according to the mold drawing, and consider it when designing the model.
B. Determine the measurement location and the positioning reference of the template.
C. Defining the method of use of the template, it must be explained when there are special requirements.
D. Calculate process dimensions and dimensional deviations.
E. Number all the samples and mark them on the mold drawing.
F. According to factors such as mold production batch size, precision, molding cycle and production conditions, technical requirements are put forward.
G. Propose a sample processing plan and write a process specification.
Requirements include:
A. It can correctly control the shape, size and precision of the measured surface.
B. On the basis of quality assurance, minimize the number of samples
C. For the measurement of complex profiles, the partial profile and the full profile should be designed according to the actual needs and processing sequence.
D. In addition to the positioning surface, the repetition between the pattern surfaces should be avoided to prevent interference.
E. Reasonable structure, good craftsmanship, convenient use and repair.
F. Reasonably determine the accuracy of the sample and correctly select the materials used for the sample.
G. For mass production or molds with high precision requirements, consider designing test samples.
Hook and loop sanding disc is also a classification of round sanding disc, it is also called self-adhesive sandpaper, which can be glued to the sanding disc tray and very convenient to use
Compared with Abrasive Fiber Disc , round disc hook and loop also can be a kind of Quick Change Disc , which is more convenient and cost-effective.
We use the high quality sandpaper rolls and total automatic Abrasive Sanding Disc punching machine, so the production ability is very enough and has ready stock.
Round sandpaper has the advantages of anti-clogging, anti-static, good flexibility, and high wear resistance.
Due to its wide range of uses, there are also many varieties of hook and loop sanding disc. The most commonly used are red sanding disc, yellow/gold sanding disc, green sanding disc, and white sanding disc, etc.
The sandpaper disc is using aluminum oxid abrasives, with grits as below: 40#, 60#, 80#, 120#, 180#, 240#, 320#, 400#, 600#, 800#, 1000#, 1200#, 1500#, 2000#.
The abrasive polishing disc can be punched into various shapes, round, round with holes, triangle, rectangle, iron shape, neckline shape, etc.
This product is round abrasive disc size: 100mm, 125mm, 150mm, 180mm, 225mm or other size can be customized.
The holes best selling is with 6 hole, 8 holes, 15 holes, 17 holes or customized.
We can also supply Abrasive Flap Disc , Flap Disc Backing Pad , Flap Disc Adhesive Glue, Flap Wheels , Abrasive Machine (Flap Disc Making Machine, Abrasive Belt Making Machine, Sanding Disc Machine , Flap Wheel Machine ), Cotton Buffing Wheels , Nylon/non-woven Surface Conditioning Products, Cutting Wheels , Grinding Wheels etc. If you are interested please feel free to contact us.
Hook And Loop Sanding Disc,5inch 8 hole sanding disc,Abrasive Sand Disc,Alumina Sanding Disc,Angle Grinder Sanding Disc
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com