The network cable socket is generally applied to the interior walls as a network cable jack, and the connection method of the network cable socket is almost the same, which is more convenient and simple than the crystal head. Moreover, the network cable has the color corresponding to the wrong connection, but the wiring tool used is not a cable clamp. Now. The following small series introduces the maintenance of network cable sockets and network cable sockets.
Network cable socket connection
The first step is to strip the twisted-pair's jacket with a stripping tool at a position about 8 cm away from the head, and expose four pairs of twisted pairs.
The second step is to remove the line, press the corresponding thread into the threading column, and select the preferred line sequence pattern according to the color code indicated on the information module.
The third step: after pressing all the lines into the slot, press the module and the wire with the tool, hold the wire inside the module, and then trim the excess thread.
Step 4: Mount the information module of the line to the 86 box panel so that the wall cable socket is installed.
Network cable socket maintenance
1. Do not switch the cable socket repeatedly, otherwise it will increase the power consumption, because the multi-control switch will generate a large starting current when it is closed, and it will also affect the service life of the cable socket, resulting in the wear of the network cable socket operating mechanism;
2. When the cable socket is connected, it must allow the electrician to operate, because the wiring process itself is not professional, may cause trouble to the future life;
3, network cable sockets should be cleaned with alcohol, can not be wiped with water, it will leave traces, and unsafe.
Editor's summary: About the network cable socket connection and the maintenance of the network cable socket is introduced here and hope to be helpful to everyone. Want to learn more related knowledge can focus on this site information.
Cable outlet
Rotary lobe pumps in Food industry
Sanitary grade lobe pump is one of the products specially developed by Durrex pumps company to meet the customers in the production process of high hygiene requirements. Working chamber has sanitary rotor, rotor locking nut O - ring, pump body without sanitary dead angle and Higher hygienic grade. Support CIP, SIP. The surface roughness Ra 0.2--0.8um, in accordance with 3A, FDA standards. Can be widely used food, medicine and other materials with high requirements for hygiene level.
Rotor pumps for food, Rotary lobe pumps for food, Lobe pumps
NINGBO DURREX PUMPS CO.,LTD , https://www.durrexlobepump.com