Home is a relatively independent habitat that we create for ourselves. However, we cannot completely separate from the external environment and live independently. We need a reasonable exchange and exchange between indoor and outdoor, through such exchanges and exchanges. , can make our room has the temperature, humidity, air, light and sound environment that meet the needs of life. To achieve this goal, the most direct way is the window, choose a good window, it can also improve our quality of life and reduce energy consumption.
Out of the myths of plastic windows
Windows can be roughly divided into three categories according to their materials. Wood, plastic (steel), and aluminum alloys have their own strengths. Among the plastic (steel) windows, because of the use of plastic materials, the weight is small, the heat insulation performance is good, and the price is relatively low. For plastic (steel) windows, Yan Leiguang, deputy secretary-general of the China Construction Metal Structure Association, told reporters that the well-known “plastic steel window†was used to distinguish it from other household plastic products. It was actually not. Plasticized polyvinyl chloride (PUV-U) plastic windows, so the specification name should be "plastic window."
In the use of plastic windows, people are most concerned about the deformation of the plastic window. In this regard, Yan Leiguang said that the window deformation is mainly thin profile walls, reinforced steel size is less than the profile gap is too large, it does not play a reinforcing role, resulting in a small overall window stiffness, of course, including some companies design and production technology is low, Make the performance of the window not reach the standard. In this regard, the country has new standards that ensure that the thickness of the profile wall will reduce the phenomenon of deformation. Among them, what cannot be ignored is the technical impact of substandard products on the entire industry.
With regard to the recycling of plastic windows, environmental issues are concerned. Yan Leiguang told reporters that plastics are not easy to degrade, but recycling and recycling are more environmentally friendly than recycling and burying. At present, there are already existing technologies that recycle plastic doors and windows, crush and smash them, separate layers of unused materials, and then reuse them according to the quality of the materials. Good quality can be processed into profiles again. Poor quality can also be achieved. Degraded machining uses other auxiliary profiles. Moreover, the energy consumption of this recycling method is also very low.
Others believe that the use of plastic windows means that the grade is not high, for which Yan Leiguang said that consumers do not have to worry about this, because different materials can produce different grades of windows, plastic windows are the same. The grade of the window not only includes a good-looking appearance, but also focuses on superior performance. Therefore, the plastic window can also take into consideration beauty and high performance. Of course, the production technology of plastic windows should be an organic collection of materials, design, processing, ergonomics, aesthetics, and other technologies, and therefore requires the joint efforts of the entire industry. In addition, according to Yan Leiguang, rigid PVC is a flame-retardant material. Even after a long time of burning, the flames will be emitted. Once the flame disappears, PVC will self-extinguish, and in a building, the plastic window will not become a fire. The point is therefore safe building materials that can be used with confidence.
Plastic window has excellent heat and sound insulation
According to Yan Leiguang, currently building energy consumption accounts for about 30% of the total energy consumption of the society. At the same time, building energy consumption includes heating, air conditioning, lighting, and external maintenance structures. In this area, the thermal energy consumption of the maintenance structure is the largest proportion. , And the thermal energy of the windows accounted for about half of the thermal energy of the external maintenance structure. It can be seen that the windows are the weak points and key points of building energy conservation. Yan Leiguang told reporters that in windows of different materials, plastic windows are known for their superior energy-saving effect. If you compare windows made of different materials using the same glass, the material of the plastic window frame is plastic, and its thermal conductivity is much lower than other materials. Therefore, in general, the use of plastic windows can reduce indoor and outdoor as much as possible. Heat exchange, so as to achieve the purpose of energy conservation and emission reduction.
In addition, Yan Leiguang said that the soundproofing performance of plastic windows is also very good, especially for home installations with street windows. For example, there have been people in Europe and America have done a test, so that buildings meet the same standards of noise requirements, the installation of aluminum alloy doors and windows of the building and the traffic trunks need to be 50 meters away, while the plastic doors and windows can be reduced to 16 meters or less. Of course, for those families living on the street and facing daily noise, the use of insulating glass can also greatly reduce noise in the room.
Good airtightness is the key to making windows sound and heat insulating. In this regard, Yan Leiguang introduced that good airtightness is also related to the assembly process of windows. For example, plastic windows use a welding method to completely assemble windows so that airtightness of windows during use can be better protected. . If you use plastic doors and windows with good sealing performance, you can save energy by 30% to 50%, and can reduce indoor noise to one-third of the outdoor, and maintain at around 30 decibels.
Use plastic window correctly
Yan Leiguang pointed out that there are many small factories that are only seeking efficiency in the market. They do not have their own technology and they regulate the market through imitation and low price impact. However, such windows have no quality guarantee. Therefore, consumers must go to the formal building materials market to buy plastic windows. At the same time, the reporter learned that because the plastic windows on the market are mostly assembly windows, the quality of the windows needs to be distinguished from the details when purchasing. For example, the appearance of the plastic window should be blue and white, and the color is too white or gray, indicating that the stable ingredients in its material are not enough. It is easy to age and turn yellow. Check if the hardware is flexible and smooth, and the window bead and seal are auxiliary. Whether the material is matched with the main profile; the cavity structure of the plastic window is defined because it determines the insulation and sound insulation of the window; the drainage groove and the air pressure balance hole should be processed in a staggered position so that the cold wind and dust can be prevented from entering directly. The more rigid part of the drainage window of the plastic window is equipped with a closed lid to prevent rain from flowing into the room through the hole. Only by selecting products with excellent quality can we ensure the comfort and comfort of life.
Door and Window Villa Design Window Glass Door Price Aluminum Alloy Building Materials Market Technology Glass Glass Door
High Quality Cheap Price Outdoor Solar Powered Garden Lamp 100 LED Waterproof Motion Sensor Solar Wall Garden Lights
Outdoor Solar Powered Garden Lamp ,Cheaper Price Solar Wall Lights,Solar Wall Garden Lights,Motion Sensor Solar Garden Lights
Shenzhen You&My Electronic Technology Co., Ltd , https://www.szyoumylighting.com