The polishing machine consists of a fuselage, a work roll, a pendulum feed roll, a brush roll, a vacuum system and an electrical control part. There are three work rolls, namely a polishing roll, a grinding roll and a flannel roll, which are respectively equipped with a felt roll, a rubber roll and a steel roll as supply rolls, so that the machine can be both thrown and softly thrown. Among them, the grinding roller has a lateral oscillating mechanism, and performs reciprocating sliding 55 times/min along the axial direction of the roller while rotating and grinding, so that the grinding is fine.
There are two main types of polishing rolls, which are made of artificial agate and are bidirectional spiral grooved rolls from the middle of the roll. They are made of special cloth and made into a disk shape. The two rolls of the roll are pressed into a spiral cloth roll, or The felt rolls are wrapped into a non-helical felt roll, and can also be made into a glossy paper (cloth) roll by wrapping a velvety soft paper or cloth. They can be used for polishing different leather products and different processes.
The guide angle and groove size of the spiral groove on the polishing roller are specially designed to facilitate the polishing of the motorcycle while the leather is stretched during the high-speed rotation of the roller. The scraping dust and dust along the spiral flow along the spiral groove The wsm-03 high-speed polishing machine is discharged from both ends of the roller, and at the same time, the heat dissipation performance of the polishing roller is improved, the polishing resistance is reduced, and the continuous polishing time of the roller is prolonged. The feeding roller device is on the swing frame, and is controlled by the foot pedal to be close to the polishing roller, so that the adjusting swinging frame can adjust the gap between the feeding roller and the working roller, and the brush roller under the polishing roller is used to prevent the twisting work roller from turning. Same as the steering roller.
The vacuum system forms a dust suction chamber by the protective cover of the work roll and the dust suction air passage in the fuselage, and the induced draft fan discharges the dust through the air passage. At the outlet of the inner tube, the air volume is adjusted by the shutter, the dust is discharged into the dust filter device, and a safety baffle is arranged in front of the work roll guard. When the hand collides, the feed roller returns to the non-working position, the host stops working, and can be restored after restarting. normal work.
The three-dimensional vibration strengthening polishing process is a combination of vibration cutting polishing and shot peening processing. During the machining process, the vibration is generated by the electric vibration exciter, causing a certain amplitude and vibration vibration between the grinding medium and the machined part, causing irregular collision between the strengthening medium and the three-dimensional direction of the workpiece, polishing liquid and abrasive and part surface. Scratch to achieve enhanced polishing. The vibration polishing process is actually a mechanical calendering process. In this process, the workpiece, the abrasive and the brightener form a system, and the abrasive obtains energy against the surface of the workpiece by the vibration of the high-frequency bottom spoke of the vibrating trough, causing microscopic plastic deformation. Thereby reducing the surface roughness, the brightener acts on the surface of the workpiece, and the oil stain and impurities on the surface of the workpiece can be quickly removed to achieve a brightening effect, thereby improving the calendering quality. When working in the vibration system, the brightener has a strong cleaning effect, which can quickly remove some insoluble oil and impurities from the workpiece and the abrasive surface.
The panel and the main board are respectively controlled by a single-chip microcomputer, and have the functions of automatic frequency finding and locking; the five-segment spark pulse and the ninety-nine-segment pattern and the enhancement pulse are accurately generated by the microcomputer, and the pattern state can realistically simulate the light from matt to very thick. Spark pattern; the strengthened state can transfer the material with high wear resistance such as tungsten carbide to the working surface of the workpiece, thus greatly prolonging the service life of the workpiece; the machine is very suitable for fiber whetstone due to the improved sound wave output circuit. The diamond trowel is used for the vibration grinding of the rough surface; the voice prompt function of the human voice with artificial intelligence is added, which provides a strong guarantee for the correct and safe use of the machine.
Heat Lamp Oval Marble Carving Station,Oval Marble Carving Station,4-Lamp Carving Station,Marble Culinary Station
Shaoxing Biaoyi Hardware Products Co., Ltd. , https://www.byeob.com