Preliminary discussion on emulsion of wire cutting machine

I. Introduction Since the first CNC wire-cutting machine tool was successfully developed in China in 1967, it has passed more than 20 spring and autumn. From discrete components, microcomputer control to automatic programming, despite the fact that compared with advanced countries, it is not too late to start, but now it is behind, that is, we have not fully grasped the general trend of this emerging technology development.

LPG Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of LPG Mass Flow Meter, LPG Mass Flowmeter, LPG Flow Meter, LPG Flowmeter, LPG meter, ATEX, IECEx & CE approved.

Sealand have DN03 to DN150 size meters and are developing bigger models. Each meter can be connected with your computer through a USB-to-RS485 converter. The detail steps are as follows. Connect the meter and computer with a USB-to-RS485 converter( converter A+ end to transmitter A+ end, B- to B-, and GND to GDN); turn to device manager of the computer to check COM port connected with meter. Start the software, select the right COM port and click Connect; do not change any other parameters (if you do not know the right one, click Automatic options on the left, click Connect, plug & unplug the transmitter, and then check if it is connected). You can click Connect on the tool bar to disconnect or connect again. It will shown Connected/Not Connected at the bottom of this interface.

LPG Mass Flow Meter, LPG Mass Flowmeter, LPG Flow Meter, LPG Flowmeter, LPG meter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com