QBY pneumatic diaphragm pump main features

1. Without irrigation, suction up to 7m, lift up to 50m, outlet pressure ≥ 6kgf / cm2; 2. Flow spacious, through the good performance, allowing the maximum particle diameter of 10mm. Pumping slurry, impurities, the pump wear is minimal 3. Head, flow through the valve opening to achieve stepless regulation (pressure regulation in the 1-7kgf / cm2); 4. The pump without rotating parts, there is no shaft seal , The diaphragm will pump the moving parts of the pump and the working medium completely separated, the media will not be delivered to the outside leakage. So pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety; 5. Do not need electricity, safe and reliable use in flammable and explosive places; 6. Can be immersed in the media work; Easy to operate, reliable operation, just open and close the gas valve simply open and close, even if due to unexpected conditions and a long period of non-media operation or a sudden shutdown, the pump will not be damaged, in case of overload, the pump will automatically shut down , With self-protection performance, when the load back to normal, but also automatically start running; 8. Simple structure, less wearing parts, the pump structure is simple, easy installation and maintenance, pump delivery medium will not come into contact with the valve, Unlike other types of pumps due to the rotor, piston, gear, blades and other components of the wear and tear and the gradual decline in performance; 9. Can transport a more viscous liquid (viscosity below 10,000 cps); The pump without oil lubrication, even idling, the pump has no effect, which is a major feature of the pump.

Pipe Cutting Machine

The company research and development of double servo precision automatia pipe cutting machine, suitable for all kinds of pipe material, and the soild pipe cutting, especially suitable for the mass production of the enterprise, the machine has high production efficiency, good rigity,high precision(make sure the error within 5 wire), one feed can cut more piece.The machine adopts PLC control, the most advanced double servo positioning system,hydraulic clamping feeding. Make up the previous machine of rust, bending the disadvantages of insufficient material, eliminate waste.

The machine has warning for borken blades/no material/remain material in insufficient, high production efficiency,and can achieve more than one machine management.The pipe cutting machine adopts the cross roller guide rail, with good rigidity, small rolling friction, long life, high precision etc.Vertical and horizontal drag plate with double feed servo system, a fast response, stable feeding. The Tube pipe cutting machine use special bearings steel cutter chip, easy and quick to change cutter.The mahcine can be divided into three side Chamfer Pipe Cutting Machine and od turning Steel Pipe Cutting Machine.

Pipe Cutting Machine,Taper Roller Bearing Machine,Bearing Ring Machine,Pipe Parting Machine

Shaoxing Sunfong Intelligent Equipment Inc. , https://www.zjsxsunfong.com