The following methods can be used to detect the imbalance of the Reitz fan. In general, there are two large users who can try it. The correction is configured in the opposite direction of the imbalance, and the method of deduplicating the two methods in the unbalanced direction is quite different.
Some users will use the welding method to achieve the balance of the Reitz fan. The plate-shaped soldering piece used has a certain width and thickness, and the length depends on the amount of unbalance. The general fan impeller is also balanced by electric welding. Balance the rotor of a small motor, sometimes using a soldering method. At the time of verification, the weight of the solder is selected according to the amount of unbalance. Rivets are sometimes used as counterweights. Compared with other methods such as soldering, this method can generally be accurately corrected. Blades, turbines, clutch plates, etc. can be used in this way. The screw holes are equidistantly arranged on the circumference of a certain radius of the rotor, and screws of different lengths are screwed in accordance with the amount of unbalance to correct. All four methods belong to the configuration of the correction in the opposite direction of the imbalance.
It is also possible to use a drill bit to drill holes in the rotor to eliminate the imbalance of the Reitz fan. The principle of this method is very simple, and the same as verifying the new air purifier and drilling. Almost no need for precision balance. Rotors with smooth surfaces, such as blades, pump impellers, centrifugal separator rotors, and drum pairs, are generally calibrated by grinding. For a rotor having a uniform thickness of tabs or ribs in the balance, a milling method may be employed when correcting at the tab.
These methods can help users to verify the imbalance of the Reitz fan, and find a reasonable solution based on the cause of the imbalance is a very effective method for the user to solve the problem.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Suzhou Newstar Hardware Co.,Ltd is a China professional complete Socket Set manufacturer, we offer customer mechanic Tool Set complete tool box set. The sockets are are from CRV material for good use, and competitive price. All the tools are qualified and well packaged, no damage during delivery. We have more than 15 years experience in tools set industry, which have made us a wide business in worldwide and supports in Chinese other tools suppliers. Welcome your visit.
Complete Socket Set,Mechanic Tool Set Complete,Complete Mechanic Socket Set,Complete Tool Box Set
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.hardwarenewstar.com