Because aluminum alloy doors and windows are very practical, they are welcomed by consumers. They have good thermal insulation and can effectively isolate noise to a certain extent. As the name implies, it is a kind of door and window made of aluminum alloy extruded profiles. . However, no matter how good the performance material is, it will inevitably lead to unexpected small problems in the long-term use. These small problems will bring security risks and inconvenience to the normal use of life over time, so we must Pay attention to related maintenance items in daily life.
First, the correct use of aluminum alloy doors and windows
Many people use caution in the daily use of doors and windows, and can not effectively control their own strength when switching, thus causing unnecessary damage, here you need to remind everyone, the best quality products Can not withstand the use of brute force, so in the daily use of aluminum alloy doors and windows, we push and pull the action as light as possible. If you find that there is difficulty in pushing and pulling, do not pull it vigorously. Check it patiently to see if there is any fault. Dust and deformation are the fundamental causes of the problem.
When the weather changes, you should also pay attention to maintenance and use, such as rainy days and snowy days. After the rain stops, you should wipe the water in the dry chute with a soft cloth, and feel the push and pull. You can also apply a small amount of oil to reduce friction. After the wind and sand weather stops, the dust should be removed from the recesses of the aluminum alloy doors and windows with a vacuum cleaner.
Second, do regular cleaning work
Aluminum alloy doors and windows must be cleaned in daily use, especially the dust and dirt at the corners of the door frame. If it is not cleaned in time, it will affect the normal use. Therefore, before cleaning, the dust should be removed with a vacuum cleaner. Next, wipe it with a softer rag and mild water. If the dirt is difficult to remove, use a neutral detergent to help wipe it. Remember to use acidic and alkaline cleaning agents, which will cause damage to the surface of doors and windows. Laundry detergent soap will not work. Do not use the door frame as a support point when cleaning.
Third, daily inspection is essential
1. In daily use, it should be checked regularly, especially to check the link parts, hardware accessories, etc. If damaged parts are exchanged in time, avoid small problems and become big problems. There are three places on the aluminum alloy doors and windows that are the most vulnerable to damage. They are the positioning pin, the wind bracing, and the ground spring. These three places are the most vulnerable, so these places must be clearly seen and the problems should be repaired in time.
2. In places where friction is often caused, it is necessary to apply oil regularly to avoid the difficulty of pushing and pulling during use.
3. At the joint of the frame, there are several screws that should be carefully watched. If loosening occurs, it should be tightened in time.
4, sealing tops and glass sealant is the key to determine the sealing and insulation of doors and windows, once the phenomenon of shedding occurs, it is necessary to find relevant materials in time to fill.
Using Fuxuan aluminum alloy doors and windows in the right way can make the most of the long-term use, and some improper use will not only cause damage, but also make the doors and windows lose good sealing and heat preservation. At the same time, regular maintenance for it will greatly extend the service life.
Concerned about surprises
Previous: Keep in mind that these small custom hardware tools will never hurt again. Next: Analysis of the causes of high-strength fastener cleaning problems
The mechanical concealed cistern is a common bathroom fixture that stores flush water and controls flushing. It is usually installed in the wall, and there is only a button on the outside to start the flush. Its design makes the water tank no longer occupy the toilet space, thus providing more free space and beautiful appearance.
Space-saving: The design of the mechanical hidden water tank allows the water tank to be installed inside the wall, saving valuable bathroom space, providing more free space and a beautiful appearance.
Beautiful: The design of the hidden water tank makes it no longer stand in the bathroom like the traditional surface-mounted water tank, thus improving the overall aesthetics of the bathroom.
Water saving: The mechanical hidden water tank can precisely control the water volume when flushing, avoiding excessive consumption of water resources, thereby reducing water usage and saving water bills.
Long service life: Compared with the traditional surface-mounted water tank, the mechanical hidden water tank has a longer service life and lower maintenance costs because it is more concealed and less susceptible to external factors.
More hygienic: The traditional surface-mounted water tank needs to be cleaned frequently, and the scale and sundries hidden inside the water tank are not easy to be polluted by the outside world, so it is more hygienic.
Mechanical Concealed Cistern, Concealed Flushing Cistern, Toilet Flush Tank, Build In Toilet Cistern
Guangdong Fabia Intelligent Technology Co., Ltd , https://www.nbsmartfabiatoilet.com