Stone is a natural, hard building and decorative material that is sturdy and elegant, and is appreciated and loved by people. However, in the reality, the water stains, vomiting yellow, rust spots, white huahua, flower face, looseness, etc. of the buildings decorated with stone make the stone lose its magnificent color and make people feel tired. The phenomenon of water stains, spitting yellow and even cracks appearing in stone is collectively referred to as “stone diseaseâ€. The occurrence of stone disease directly affects the visual effect of stone, and the stone care often used in daily life can reduce the occurrence of stone disease or remove the contaminated surface to restore the appearance of beautiful stone.
According to the cause of the stone disease, the protection of the stone must first start from waterproofing. Waterproofing is to infiltrate the protective agent into the interior of the stone to form a protective layer. In the past, it was generally cured with wax and lighted on the surface of the stone. However, wax is a kind of airtight sealant. The moisture inside the stone can't be emitted. It is accumulated in the interior of the stone, which is easy to make the stone disease. In addition, the wax is not enough, it is easy to occur, so wax is not a good protection. Agent.
The main component of the protective agent currently used is a special composite silicide which has good permeability. It penetrates into the interior of the stone to form a waterproof layer, which can prevent the pollution inside the stone from seeping into the surface, but the water can be volatilized and obtained. Breathe. At the same time, it can prevent external pollution from infiltrating into the interior of the stone, so that the stone products can be protected for a long time, and the anti-pollution ability of the stone is improved, and it is convenient to clean up. Through the maintenance of the stone generally can achieve the following effects: 1 water absorption rate is reduced, the general moisture content can be reduced by 75%, or even almost no water absorption. 2 The color of the stone is darker and more distinctive, but it does not harm the natural feeling. 3 moisture-proof effect. 4 UV protection, to prevent stone cracking and weathering. 5 is not easy to be contaminated and easy to clean.
According to the protection mechanism, there are three types of curing agents currently sold in China: one is various protective agents, such as water-absorbing protective agent, anti-fog curing agent, bright curing agent, cement whitening agent, etc. Used for preventive protection before use of stone. The second category is cleaning agents, such as rust removers, degreasers, strong cleaning agents, concrete thin layer removers, etc., mainly used in the case of contaminated stone. The three types are reinforcing agents, which mainly strengthen the hardness and strength of softer stone to prevent weathering and cracking. In combination with the above measures or methods, the most important one is prevention in advance. The term “prevention is better than cure†is a phrase that is suitable for human health and is also suitable for stone forever.
Semi Inset Basin Tops,Inset Basin Tops,Best Semi Inset Basin Tops,Semi Inset Basin Tops For Sale, Semi Inset Basin with Overflow
Colour: Gloss White
32mm Waste With Overflow / 32mm Waste Without Overflow
Tap Hole: 1TH / 0TH
Material: Porcelain
Supply Ability: 15000 Piece/Pieces Per Month
Place of Origin: Chaozhou, China
Customization: Customized Logo(Min. Order: 30 Pieces)
Customized Packaging(Min. Order: 30 Pieces)
FOB: Shenzhen
Shipping: Support Express · Sea Freight · Land Freight · Air Freight
After-sale Service: Online Technical Support,
Project Solution Capability: Graphic Design, Total Solution For Projects
Semi Inset Basin Tops,Inset Basin Tops,Best Semi Inset Basin Tops,Semi Inset Basin Tops For Sale, Semi Inset Basin with Overflow
Duraplex Limited , https://www.fsduraplex.com