Living in a big city, we are looking for a quiet space every day to relax our tired body. When the windows in our home are not soundproof, everyone will think about how to solve them properly. So everyone knows why the windows are not soundproof? What if the windows are not soundproof? Today, Xiaobian will take a look at it with everyone. What are the reasons why windows are not soundproof and why they are not soundproofed?
What if the windows are not soundproof?
1, converted into window insulation window
If the window sill in the home is not wide enough, or if the ventilation function of the sound insulation window is not good enough, the original window can be removed and a low-frequency soundproof window can be modified. Nowadays, the double-layer hollow windows are mainly used for sound insulation. This method can also play a role in isolating traffic noise, but from the sound insulation effect, it is worse than adding a layer of soundproof windows.
2, attached to the window sound insulation film
The sound-insulating film has a multilayer structure in which a sound-insulating resin is sandwiched by a polyvinyl butyral (PVB) layer. The entire intermediate film is uniformly distributed with fine particles (insulating fine particles) having a heat insulating effect. When a sound-insulating film is used in a building, the high-performance interlayer film sandwiched between the films has visible light transmission properties, so that it does not block the visible light transmittance of the building and maintain a clear line of sight.
3, installed soundproof curtains
The soundproof curtains are equipped with a curtain box on the top of the inner frame beam installed in the window. The curtain box is equipped with a curtain winding shaft. The curtain is wound on the winding shaft and protrudes through the curtain box at the bottom of the curtain box. Each side of the window is respectively provided with a curtain chute in which the two side edges of the curtain can slide respectively, and a bottom slot of the window is provided with a curtain bottom groove, a through seam at the bottom of the curtain box, two curtain chutes and The inner side of the curtain bottom groove is provided with a groove sealing strip. After the curtain protrudes from the curtain box, passes through the curtain chute and the bottom edge of the curtain enters the bottom of the curtain, and the window is completely closed, thereby completely closing the window with the curtain. Soundproofing. Some places like cinemas use more soundproof curtains and the effect is not bad.
4, soundproof sealing strip
Soundproof sealing strips are only effective for poorly sealed windows, and the price is very cheap, but make sure that no sound insulation is caused by a large gap in the window, otherwise it will be useless. The sealing strip blocks the gap of the window and acts like a soundproof cotton.
5, soundproof window
Soundproof windows are generally composed of double or triple layers of glass or window frames of different thickness or glass, and the glass used is thicker than ordinary window glass. However, the price of such a soundproof window is usually between 800 yuan / square meter and 1,300 yuan / square meter, and the price with ventilation is higher.
6, ordinary plastic steel window
This method is suitable for outdoor traffic noise is not particularly serious, and if the window sill in the home is relatively wide, a layer of ordinary plastic steel window can be installed inside or outside the original window. Plastic steel windows should have good sealing performance. The distance between the two windows should be more than 10 cm.
Reasons for not soundproofing
1, related to the glass material of the window
As we all know, the texture of glass is divided into many kinds. Therefore, the public should pay special attention to the selection. If the product is inferior, not only the sound insulation effect is not good, but also there are certain safety hazards.
2, related to the selection of window frames
From the current situation, the frame used in most users' homes is aluminum alloy. However, since this kind of article is a single cavity, it is relatively thin, so the sound is easy to penetrate. In comparison, there are many plastic profiles. The cavity and the walls are thicker, making it less susceptible to sound penetration from the profile.
Solving such a situation is necessary because the sound insulation of the windows can cause serious obstacles to our lives. The above is the reason why Xiaobian today introduces the window that is not soundproof and does not soundproof. It is over here. If you want to know more information, please continue to pay attention to the decoration home.
More related wonderful reading:
How to do windows sound insulation materials
kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets-jm.com