Recently, Yang Gong, who is responsible for workpiece design in our company's technical center, has given me a question: When designing extreme gauges (such as design drawings for general rules and regulations), he always needs to be based on the size of the number of objects to be inspected. Find the tolerance table, find the range of the size, and then within this size range, check the closest value of the difference between the upper and lower limits, and then go through the complicated calculations to get the general rule of the inspection object. Upper and lower limits. Volume
Gate Valves are called "full-flow" valves; there's a direct unobstructed path for flow right through the middle of the valve. A wedge-shaped brass gate is lowered into a machined slot to close the valve. They should either be completely open or completely closed. Water flowing through a partially open gate valve wears away the metal and causes the valve to fail over time.
Brass Gate Valve, Flanged Gate Valve, High Pressure Gate Valves, Water Gate Valves
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com