Vacuum pump troubleshooting and maintenance methods

At present, the rapid development of domestic light vehicles, which undoubtedly for the vacuum booster pump provides a vast market. Therefore, in the promotion and use of the process, we must understand and master its performance, principles. The only way to effectively ensure the pump braking performance, extend the service life, play a safety role. Vacuum Booster Pump Common Malfunctions and Maintenance Methods Vacuum Booster Pump Common Malfunctions and Maintenance Methods Vacuum booster pump is a kind of high precision and sensitive working pump. When using, the following rules must be strictly observed: 1. Vacuum booster pump uses oil to lubricate friction Surface, seal all gaps (rotor, slider, pump body, pump cover the gap formed), so must choose the appropriate lubricant and appropriate lubrication. 2, the use should always check the operation and lubrication is normal, with or without abnormal noise, so that timely detection and troubleshooting. 3, the application should always check whether the pump leakage phenomenon. 4, if a longer time do not use the vacuum booster pump, re-use, not immediately full capacity. Third, the common failure and troubleshooting 1, the pump to extract the maximum vacuum is low, the pump extraction time extended; Failure reasons: Run, lubricating oil is not sufficient; suction pipe leakage; parts wear; gap increased leakage. Troubleshooting: Check the viscosity of lubricating oil, if not qualified, the replacement of the appropriate viscosity of the oil; Check whether the pipeline leaks, if the leak, you need to replace the leak; Check the parts for wear and tear, if worn Those who need grinding or replacement of new parts; check the pressure of lubricating oil, and meet the requirements. 2, the pump does not maintain pressure, leakage; Failure reasons: seal leakage diagnosis and troubleshooting: Check the seal is worn and inelastic, if worn, need to be replaced with a new seal. 3, the interface at the leak; cause of the malfunction: loose joints or seal damage. Fault diagnosis and troubleshooting: Check whether the loose joints, if loose, need to be sealed sealant fastening joints; if the seal is damaged, the need to replace the new pieces. 4. Disassembly pump precautions Each component in the vacuum booster pump has high machining accuracy and assembly accuracy, in general, users do not disassemble, there are questions should be sent to the manufacturer or repair center for inspection and repair, if Must be disassembled, you should pay attention to the following: a, vacuum booster pump rotor and gear are interference fit, can not be removed. b, the parts do not allow bumps and scratches, the parts clean with kerosene, stored in a clean box. c, install the slider should pay attention to the slider arc outward, may not be installed. d, assembly parts must be cleaned. e, pump assembly, the rotor should be flexible rotation. 5, Storage vacuum booster pump should be stored in a dry, non-corrosive gas warehouse, not in the high temperature and -20 ℃ below the low-temperature environment for long-term storage, so as to avoid rubber seal aging, and often check the corrosion, if necessary Replace pump anti-corrosion oil. (Editor: Li Juan QQ:) Recommended reading: Agent procurement vacuum booster pump 2016 CIMIC Xiamen 98

Solar Stair Light

Quality You Can Trust
The solar lights a seamless combination of 304 stainless steel and high-impact ABS plastic which will not rust for years, it is durable for year round use outside.

Charge Faster & Work Longer
outdoor solar stair lights can absorb more power from the sun for about 6-8 hours. The rechargeable battery work much longer than other outdoor wireless solar lights in the market, which can let the LED solar lights illuminate about 8-10 hours on a full charge.
Charge Automatically
Press the On/Off button, turn the outdoor solar lights on (Auto mode), let the solar fence lights charged in the unlimited and free sun. It will automatically turn on at dusk or with the onset of inclement weather and off at dawn. Each solar outdoor light has 3 premium quality LEDs, which can give out a visible bright light on your path.
IP44 Wet Rated & Durable
The outdoor step lighting is made of stainless steel and high quality lamp shell, can be used in rainy or wet condition. The operating temperature range is 14℉ to 122℉, suitable for step, fence, outdoor stairs, garden, deck and etc.
Easy to Install
Fast and easy installation, no wiring required, simply screw it onto the surface (Screws included). This outdoor solar LED light can be quickly installed in any place where it can absorb the sun light directly. Used for road, path, deck, dock, stair, fence, wall, garden, walkway, sidewalk, backyard etc.

Solar Stair Light,LED Solar Step Lights,,RGBW Solar Stair Lights, Newest Solar Fence Light LED Solar Manafacuture

Shenzhen You&My Electronic Technology Co., Ltd , https://www.szyoumy.com