Crack: In general, kraft paper tape and white latex are used to cover the crack (but there is no guarantee that 100% will not crack again).
Leveling: uneven wall needs to be leveled. Generally, gypsum is commonly used, and the unevenness is not more than 0.5 cm.
Patch: Generally, non-load-bearing walls such as light-weight walls and thermal insulation walls need to be patched. Try to choose a wall cloth with a better texture and white latex. If there are conditions, you can use mesh cloth, which will be better against cracking. a little.
Putty: It is better to use a putty with high fineness and hard texture. It can also add a certain white latex to the putty to improve the hardness of the putty.
Grinding: Try to use fine sandpaper, generally softer putty (such as 821) with 400-500 sandpaper, harder texture (such as wall lining, easy 呱 flat) with 360-400 is better, if sandpaper If it is too thick, it will leave a deep sand mark, and the paint can't cover it. After polishing, you must thoroughly clean the wall to avoid too much dust and affect the adhesion of the paint. The unevenness is not more than 3 mm.
Primer: The primer must be brushed evenly to ensure that every part of the wall is brushed. If the wall is coated with a large amount of paint, it is best to add a little more water to the primer to ensure uniform coating. Do not think that it is a roller with a little primer because it is a primer. The effect of the primer will directly affect the effect of the topcoat. Use the same texture roller as the topcoat.
Looking for a supplement: After the putty is finished, there will be some cockroaches (holes), which are difficult to see under normal circumstances. It will only be obvious after brushing the paint again. At this time, you need to find a supplement, pay attention to the repair must be smoothed, and then Brush it with a little more water-based primer to avoid chromatic aberration when the topcoat is different from the other wall.
Topcoat: Do not add excessive water, it will affect the thickness of the paint film, the feel and the hardness of the paint film. Try to choose a better tool. The hair of the roller should not be too short, but it must be thin, so the paint film will feel the touch. Exquisite, brushing mainly pay attention to the corner, the indirect part of each roll and the direction of the painting, the treatment of the corner, in most cases, it is painted with a pen or a plate brush, which will easily cause the corner texture to be inconsistent with the whole surface, visually there will be Difference, if there are conditions, you can buy a side roller, use the plate brush to paint and then use the edge roller to collect it. Note that the material of the edge roller should be the same as the roller of the large surface. The paint that is rolled over the place must be evenly distributed. It should not be too thick or too thin. Otherwise, the reflection will be inconsistent because of the uneven thickness. When painting, every time you roll the wall, there will be a paint-receiving action. The direction of the paint should be the same, otherwise the texture of each roll will be inconsistent, the angle of reflection will be different, and there will be differences in vision. (Recommendation: Buy a tray before painting, there will be sold in the store, use the tray to ensure that each brush is rolled, the paint on the roller is the same, so the brush will be even.)
Maintenance: The latex paint will dry after 4 hours, but the dry paint film has not reached a certain hardness. This requires nursing. It is very simple. Do not scrub or touch the wall within 7-10 days. Just move.
Various designs of colorful water tank to choose. Wall Hung Water Tank, suitbale for squatting pan.
Direct factory with professional R&D department, product range covers Smart Toilet, Bidet cover, toilet seat, tank fittings, flush tank, flush valves, and Intelligent Toilet.
We insist on the philosophy of "Technology first, Quality first, Credit first, Clients first" . Our R&D and customer service
White Tank,Dual Flush Tank,Flush Toilet Tanks,Toilet Flush Tank
XIAMEN JIEENTE IMPORT AND EXPORT CO.,LTD , https://www.xiamenjieente.com