External wall external insulation is one of the most scientific and efficient insulation and energy-saving technologies. The insulation material is placed on the outside of the main body enclosure structure, so that not only the purpose of thermal insulation can be achieved, but also the main structure of the building can be protected and extended. The service life of the building. The technology effectively solves the problem of energy loss caused by large indoor and outdoor temperature difference between winter and summer, and represents the development direction of energy-saving insulation technology. The external thermal insulation system does not produce thermal bridges, so it has good building energy saving effects.
In the winter, when the heat in the room tries to pass through the wall insulation material, it will be effectively blocked, thus reducing the indoor heat consumption. In summer, the wall insulation material will also prevent solar radiation and external heat from being introduced into the room, creating winter in the building. Comfortable environment for warm summer and cool.
Steam insulation is an energy-saving technology that includes steam pipe insulation and equipment insulation. Commonly used tools are edgers and rounders.
The utility model discloses a Kitchen Shower head that is convenient to switch the water outlet mode, has a compact structure, and is easy to use, and a kitchen faucet using the kitchen shower head. , The shower head is provided with a water separator, and the water separator is provided with an annular flow channel and an inner flow channel respectively connected to the spray water outlet body and the V-shaped water outlet body, and the lower end of the outer wall of the water separator is upwardly circular A plurality of water inlet holes connected to the annular flow channel are provided, and a first sealing ring is provided on the lower side of the water inlet hole; the water outlet end of the shower body is connected with a converter, and the converter is provided with a communicating In the water diversion cavity at the water outlet end of the shower body, the lower end of the water diversion device is installed in the water diversion cavity and can move up and down, and the upper end of the inner wall of the water diversion cavity is provided with a convex ring matching the first sealing ring, so The bottom surface of the water diversion cavity is provided with a sealing gasket that can seal the inner flow channel.
Waterfall Shower Head,Overhead Shower Head,Push Button Hand Shower,Brushed Nickel Sink Faucet
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinfaucets.com