What is the angle line? What is the use?

Yang Kok is very common in the construction and renovation, applied to the corner area of ​​the wall. The corner line of the tile is the closing strip or the corner strip of the outside corner, which is a decorative line used for corner treatment of the tiles with a 90-degree convex angle. It is mainly based on the floor, on one side made of 90-degree fan-shaped arc surface, its material is PVC, aluminum alloy and stainless steel. The following Xiao Bian take you to understand the relevant information about the lower corner of the ceramic tile.

Many friends in the ceramic tile tangle will be tangled in a question: when dealing with tile angles in the end is to choose the angle of the sun, or chamfer? The decoration company generally tells the owner to choose the Yangjiao line, and the owner will suspect that the decoration company will allow the owner to select the Yangjiao line for good construction. In the end, what is the good corner angle or chamfering angle? Let's share with you below. First, start with the concept. As some friends have no concept of Yangjiao, I will briefly talk about it below.

About the treatment of the corner of the brick: mainly depends on the level of the worker. If the level of the trowel workers is good, and the tools for grinding the tiles are relatively good, they should not hesitate to choose to grind the 45-degree angle. From the effect point of view As long as the grinding is good, the method of grinding the angle of 45 degrees is the most beautiful! If the level of the workers is really not good, then you still choose to use the angle strip, because the bad practice of 45 degrees angle grinding is also It is better to use the effect of the sun horn

The treatment of the positive corner of the brick is, in the final analysis, the level of the worker. If the masonry workers are in good condition and the tools for grinding tiles are good, they should not hesitate to grind the 45-degree angle. From the effect point of view, as long as the grinding is good, the practice of grinding the angle of 45 degrees is the most beautiful! If the level of the worker is really not good, then you still have to choose to use the sun horn, because the bad 45 degree angle grinding is not as good as the effect of the sun horn.

The inside angle and the inside angle are the angles formed by the intersection of the two faces. The recessed one is called the inside corner. The convex one is called the outside corner. The simplest way to distinguish it is: If you bump into it, you will get out of two packs. Corners can only be thrown out of the corner of a bag. During the renovation, it must be ensured that the angles of the sun's corners and the corners of the sun are vertical and flat. Acceptance can be done with vertical plumb. When tiling, the yin and yang angles should pay special attention. Workers should pour the two bricks at the junction of the corners to a 45° angle to ensure that the joints are...