First, according to the structure of the floor in the Linyi full destination decoration materials, wood floor is the preferred flooring material, because the wood floor is made of natural wood materials, it has a unique texture and texture, to meet the people return to nature In pursuit of a pristine psychology, it is highly favored by consumers. The types of wood floors have been developed from the original solid wood floors, and have been introduced to new products. They have been derived from a single solid wood floor to a large variety of wood floor types. According to the structure and materials of wooden floor, it can be divided into five categories. The first type of solid wood flooring solid wood flooring is made of natural materials - wood, machined with mechanical equipment, the characteristics of the floor is to maintain the natural material - the performance of wood. Solid wood flooring is common with flat floor, raised floor, finger ground plate, and integrated finger ground plate. The second type of solid wood composite flooring is general, in fact it can be divided into multi-layer solid wood composite floor, three-layer solid wood composite floor. The characteristics of this type of floor: good dimensional stability. 1. Multi-layer solid wood composite floor. The structure of the floor is based on multi-layer solid wood plywood. The base material is covered with a certain thickness of precious wood sheet mosaic panel or slicing veneer for the panel, through synthetic resin glue - urea formaldehyde resin glue or phenolic resin glue. Hot pressed, and then processed into a floor with mechanical equipment. 2. Three-layer parquet. The structure of the floor is like a "sandwich", that is, the surface layer is made of high-quality precious hardwood specifications. The center layer of the substrate is made of soft fast-growing material, and the bottom board is made of fast-growing poplar or medium hardwood. The three-layer board is formed by hot pressing of synthetic resin glue and then machined into the floor by mechanical equipment. The third category of wood flooring for laminate flooring is impregnated paper laminated wood flooring. It is also a three-layer structure: the surface is a melamine resin-impregnated decorative paper containing a wear-resistant material, the core is medium- or high-density fiberboard or chipboard, and the bottom layer is a balance paper impregnated with phenolic resin. The three layers are formed by hot pressing of synthetic resin glue. The characteristics of this type of floor are better in terms of wear resistance and dimensional stability. The fourth type of bamboo flooring 1. Bamboo flooring Although the material used in this type of flooring is bamboo, but bamboo also belongs to the plant category, with cellulose, lignin and other components, so people have traditionally put bamboo into wood science, so its material Although not wood, but also in the wood floor ranks. Bamboo is characterized by its wear-resistance, its specific gravity is greater than that of traditional wood, and it is processed by insect-proof and anti-corrosion treatment. There are two kinds of color: bleaching and carbonization. 2. Bamboo laminate flooring. The surface layer and the bottom layer of this type of floor are bamboo materials, and the middle is a soft wood, usually using fir. The floor of such a structure is not easily deformed. The fifth type of cork floor cork flooring is actually not processed into a floor by wood, but is instead tied to the bark of eucalyptus as a raw material, which is crushed, hot-pressed to form a sheet, and then processed into a floor by mechanical equipment. This type of sheet is similar in appearance to a soft plank, and therefore people mistakenly call it "cork" and continues to this day, so people still call it a cork floor. Its characteristics are light, soft, and good foot feeling. Second, according to the classification of floor functions According to the classification of floor functions can be divided into household floor, commercial floor, indoor floor, outdoor floor, low temperature floor heating floor, sports venue floor and other six categories of floor. 1. Home-type floor The home-type floor is suitable for an indoor room. The wear resistance and water resistance of the floor may be lower. Therefore, the above-mentioned five types of floors may all be used in an indoor room. 2. Commercial floor Commercial floor is characterized by being indoors, but it has a large passenger flow. Therefore, it is used for floors in public places such as shopping malls and has special requirements for its abrasion resistance. Therefore, not all wooden floors are suitable for use in public places. Usually, they are strengthened. Wooden floors are used in public places and their wear resistance is greater than 9000 revolutions. 3. The outdoor floor is used for the outdoor floor. Waterproof and anti-corrosion treatment must be done. Therefore, the solid wood floor must be used for anti-corrosion and waterproof treatment before it can be used outdoors. 4. The low-temperature floor heating floor heats the floor to a surface temperature of 18-30 °C through a heating tube buried under the floor. For this reason, the floor must be capable of baking at a certain temperature for a long period of time. After baking, it can transfer heat to the interior without deforming the floor and aging the paint. Therefore, it is suitable for the low-temperature floor heating floor has a dedicated floor heating multi-layer solid wood flooring, there are special laminated wood flooring. 5. Stadium floor The ground floor of the stadium is characterized by good abrasion resistance, good elasticity, and strong earthquake resistance. For this reason, the commonly used flooring is solid wood flooring, solid wood composite flooring, and there are special requirements when laying. The requirements for the floor covering shall meet: (1) the main sports functions of the stadium; (2) the protection function of the stadium; (3) the requirements of its technical performance and certain standards; (4) its protection function is limited to certain Within range (such as upright, falling, and rolling). Classification of Composite Flooring Currently, there are two major types of composite flooring on the market: one is solid wood composite flooring; the other is reinforced laminate flooring. These two types of laminate floorings have different characteristics and require different requirements for use and maintenance. Solid wood composite flooring has both natural and comfortable flooring, comfortable footwork, and good insulation properties. It also overcomes the insufficiency of solid wood flooring due to the shrinkage of monomers. Now that the living environment is no longer deteriorating, countries all over the world attach great importance to the protection of forest resources. Solid wood flooring can save precious wood resources compared to solid wood flooring. In addition, solid wood flooring is easy to install, and it is not necessary to use keels in general. However, it requires ground leveling. Solid wood composite floor can be divided into three categories of solid wood composite floor, multi-layer solid wood composite floor, fine wood composite floor three categories, more than three layers of solid wood composite floor in the room decoration. The three-layer structure solid wood composite floor is formed by three layers of solid wood, and the surface is made of high-quality hardwood specifications. The commonly used tree species are ash, birch, beech, beech, maple, and cherry. The middle is a cork board, and the bottom layer is a rotary board, arranged in a crisscross pattern. This structural composition makes the three-layer solid wood composite floor not only has the advantages of ordinary solid wood flooring, but also effectively adjusts the internal stress between the wood, and improves the shortcomings of the wood with large changes in dry humidity during the season. The solid wood floor has a good foot feeling, natural texture and color, and slightly less hardness. And because it is natural, textures and colors vary greatly. Wooden keels are required when paving, and the price is relatively high. The high-strength composite flooring has high hardness, good wear resistance, simple and convenient pavement, and low price, but the foot feels slightly worse. Solid wood flooring absorbs the advantages of the above two, the price is between the two, but the hardness is the worst of the three
Nature floor del floor decoration interior decoration paint
Snow Machine Fan Blades,Silent Axial Fan Blades,Metal Axial Fan Blades,Fan Impeller For Truck
Changzhou Keyleader Fan Technology Co. Ltd. , https://www.keyleaderfan.com