Editor's note : The world machine tool industry is in the first stage of the rebound. It is estimated that by 2015, the total market value of the global machine tool market will reach 80.7 billion US dollars. The demand for important equipment manufacturing industries such as defense, aviation, high-speed rail, automobiles and molds has increased significantly, which has led to a substantial increase in the machine tool industry. In 2010, the consumption of CNC machine tools exceeded US$6 billion, and the number of units exceeded 100,000 units, indicating that CNC machine tools have become the mainstream of machine tool consumption. China's CNC machine tools market is huge in the future. 80.7 billion US dollars: the world's machine tool production value high housing construction
A recent study by GlobalIndustryAnalysts Inc. called "Machine Tool: Global Strategic Business Report" shows that the world machine tool industry is in the first stage of the rebound, and the total market value of the global machine tool market is expected to reach 2015. $80.7 billion. The report analyzes market trends, drivers, product overviews, competitiveness, innovative products and recent industry trends for machine tools worldwide. The report reviews recent weaknesses in the machine tool market caused by the global economic downturn. The report believes that the world machine tool industry is very sensitive to changes in the economic and financial environment. The economic ups and downs have affected the changes in market demand, and capacity utilization, capacity expansion and changes in business confidence have all had a major impact on the market.
The world machine tool industry faces the toughest challenges that are constantly being thrown out by the world economic downturn. At the same time, the economic downturn has far-reaching implications for the capital goods market. In addition to the weak financial environment, machine tool manufacturers are also dragged down by the processing component market, such as manufacturing, automotive and real estate. Therefore, as the economic recession draws to a close, the recovery of economic fundamentals will help the recovery of the machine tool industry. Due to the wide range of applications of machine tools, including aerospace, automotive, processing industry, wind power, mining and oil exploration, this will be beneficial to the rapid recovery of the machine tool industry, Luo Baihui, executive secretary of the International Association of Molds and Hardware and Plastics Industry Suppliers According to the analysis, although Europe and the Asia-Pacific region still occupy a large share of the global machine tool market, the recovery of the machine tool market will be mainly driven by emerging markets such as China and India. Demand for machine tools in North America is currently showing strong growth, with both production and demand growing rapidly in recent months.
Asia-Europe Machine Tool Market Interactive Development
In recent years, the demand for important equipment manufacturing industries such as national defense, aviation, high-speed rail, automobiles and molds has increased significantly, which has led to a substantial increase in the machine tool industry. The average annual compound growth rate of CNC machine tool production in China in the past five years is 37.39%. In the past 10 years, the average annual compound growth rate was 29.94%, and the compound growth in the past 15 years was 22.10%. Driven by the national revitalization of equipment manufacturing industry and international industrial transfer, China's equipment tool purchase investment growth rate will continue to maintain about 20% in the next 5 to 10 years, and the demand of the machine tool industry will continue to maintain rapid growth. Luo Baihui, executive secretary of the International Association of Moulds and Hardware and Plastics Industry Suppliers, said that under the circumstance of demand, the output of CNC machine tools in China has maintained rapid growth. With the deepening of economic restructuring, the high growth of listed companies in CNC machine tools and CNC systems and equipment. Expected to continue. In 2010, the consumption of CNC machine tools exceeded US$6 billion, and the number of units exceeded 100,000 units, indicating that CNC machine tools have become the mainstream of machine tool consumption. China's CNC machine tools market is huge in the future.
In 2010, China's CNC metal cutting machine tools grew significantly, with output increasing by 66.71% year-on-year, and the growth rate was 67.17 percentage points higher than the previous year. In the past 10 years, China's CNC metal cutting machine tool output has an average annual compound growth rate of 31.93%. The growth data for 2010 means that the development of CNC metal cutting machine tools has entered a new stage.
In terms of exports, in addition to a small number of high-end and heavy-duty machine tools, there may be breakthroughs to enter the international market; medium and low-end CNC machine tools, high-quality ordinary machine tools suitable for users' needs, as well as metal cutting tools and abrasive tools, forging and stamping tools, machine tool accessories Wait, it will still be favored by the international market and users.
On the import side, the proportion of imports of heavy-duty machine tools and expensive machine tools may continue to decline, and the import of key components required for domestic enterprises to develop high-end machine tools and large-duty machine tools will increase. Luo Baihui, executive secretary of the International Association of Mould & Hardware Plastics Industry Suppliers, pointed out that in 2011, the import and export of China's machine tool industry will continue to grow, the structure of import and export products will improve, and the European machine tool industry will recover.
According to preliminary statistics from the Italian Association of Machine Tool, Robotics and Automation Systems Manufacturers, the total output value of the industry in Italy in 2010 was about 4.23 billion euros, an increase of 3.3% over the same period in 2009. In 2010, Italian manufacturers' sales in China were 1.625 billion euros, up 3.8% year-on-year, while exports were 2.605 billion euros in the same period, up only 3.1% year-on-year. Statistics from January to September 2010 show that the total value of Italian machine tools exported to China exceeds 270 million euros, surpassing Germany to become the largest export market for the Italian machine tool industry, and the third in the US market. It is worth noting that Italian machine tools have declined in sales to traditional export markets such as Germany, the US and France, but against India (up 83.8% year-on-year), Russia (16.4%), Iran (312.5%) and Brazil. (47.7%) and other emerging markets have seen significant growth.
In Asia, India's GDP growth has reached 5%-9%, making it the second fastest growing economy in the world. The rapid growth of the Indian economy is mainly driven by agriculture, services, manufacturing, trade and construction. In order to restore industrial growth and maintain this momentum, the Indian government has adopted a series of positive responses. In the next few years, the Indian machine tool industry will strive to achieve an annual growth rate of 35%, and exports account for more than 30% of production value, and continue to maintain its low cost advantage. It is predicted that the output value of the Indian machine tool industry will increase from Rs. 1,250 crore in the 2008-2009 fiscal year to Rs. 31 billion in the 2010-2011 fiscal year. Due to the economic recovery and the prosperity of the automobile and its parts industry, the order volume has increased significantly. In two years, the growth rate of Indian machine tool output has reached 117.5%. By 2020, the industry will reach Rs 230 billion. In order to develop Indian machine tool technology, increase production, reduce dependence on imports, provide sustainable manufacturing competitiveness and enhance national security, the Indian Machine Tool Industry Association has set the localization rate of Indian machine tools to 50% in the next five years, by 2020. Increased to 67%, the industry's compound annual growth rate (CAGR) will reach 25% in the next 10 years. To this end, the Indian machine tool industry needs to invest 40 billion rupees in the next 10 years to strengthen technology research and development to enhance the competitiveness of the industry.
At present, the Indian machine tool industry consists of 450 machine tool manufacturers, of which about 33% (about 150 machine tool manufacturers) belong to the scope of enterprises with government background. In addition, India's ten major machine tool manufacturers account for almost 70% of Indian machine tools. The Hindustan Machine Tool Co., Ltd. owned by the Indian government alone accounts for 32% of the value of the Indian machine tool industry. About 75% of Indian machine tool producers are eager to obtain certification from the International Organization for Standardization (ISO) for Indian machine tool products. When the products of large machine tool manufacturers meet the needs of Indian heavy industry, the products of small-scale machine tool enterprises meet the needs of other enterprises.
The Indian machine tool industry is basically similar to the industrial developed countries, starting late but with a high starting point. The factory buildings are small but all are steel structures. Most of them have three-dimensional libraries. The products are all CNC machines with medium-end and above. They have not seen the manufacture of five-axis and large-scale CNC machine tools, but they can meet the current needs of India. There are not many employees, but the proportion of technicians and sales staff is high. English and computers are widely used, and computer applications are very popular. The annual sales revenue of these companies is about 80,000 to 90,000 US dollars, about 600,000 yuan. Enterprises generally attach importance to export and overseas market development, adapt to India's national conditions, attach importance to the implementation of turnkey projects to users, and pay attention to user services. Enterprises attach importance to corporate culture construction and humanized management, paying attention to improving the cohesiveness of enterprises.
According to the European Machine Tool Industry Cooperation Council (CECIMO), orders accepted by European machine tool manufacturers have been growing since the end of 2009. In the first half of 2010, its growth rate was almost 60% in the same period of 2009. Affected by strong growth in imports and exports in Asian markets such as China and India, all industrial products in Europe have grown. In the first half of 2010, EU-27 exports to China increased by about 40% year-on-year. Recent statistics show that although international orders are growing at double-digit rates, growth has slowed. This shows that after the economic recession, the euro zone has fallen into a sovereign debt crisis, dragging down the pace of economic recovery. Although the recovery is still going on, the current industry output is still below pre-crisis levels.
Looking at the product export line, the export of advanced technology products ranked first. In the first half of 2010, about 60% of the machinery and vehicle products of the 27 EU countries were exported to China. In the machinery industry, especially in the machine tool industry, product value comes mainly from R&D and design. European industrial strategies must ensure high investment in high value-added products. Luo Baihui, executive secretary of the International Association of Mould & Hardware Plastics Industry Suppliers, said that the European machine tool industry has traditionally been export-oriented, but European customers are still the core support of our industry. Because manufacturing has always been an important part of the European economy and the main driver of economic recovery.
President Obama put forward the slogan "The United States has to return to manufacturing," and the Japanese government has also taken measures to control the M&A of the machine tool industry. In order to completely get out of the crisis and maintain a strong European industrial base, maintaining the leading position of European manufacturing and the development of enterprises, EU policy makers expressed support for manufacturers to launch initiatives to revitalize research and development capabilities and develop new solutions.
Recently, the European Union has issued a series of initiatives, one of which is Key Energy Technologies (KET), which will play a very important role in promoting future products and services. As one of the six KET's advanced manufacturing systems, it is able to produce products efficiently, environmentally and sustainably between departments.
According to FilipGeerts, Director General of the European Machine Tool Industry Cooperation Council (CECIMO), CECIMO is a leader in the world's machine tool industry associations, mainly due to the cutting technology and perfect solutions they provide. Although their competitors have adopted a similar strategy, they still stay ahead. According to FilipGeerts, the production of the European machine tool industry in 2011 will be significantly better than in 2010, and this balanced and sustainable upward trend will continue in the next few years. However, it will not return to the 2008 level in the near future.
As the world's largest consumer of machine tools in the world, China's self-sufficiency rate in the high-end CNC cutting machine tool industry is seriously low, and there is a big gap between the design and development, materials technology, parts and components and the world's advanced countries. In the benefit of the national industrial policy, the huge demand of the downstream industry has won valuable development opportunities for China's CNC cutting machine tool industry, and continuously improved consumption capacity and infrastructure construction caused by regional revitalization planning. It has been decided that China's automobile market and construction machinery market will maintain good growth for a long period of time, which will determine the good prospects for the growth of China's CNC cutting machine tool market. Luo Baihui, executive secretary of the International Association of Mold and Hardware and Plastics Industry Suppliers, pointed out that China is making efforts to develop emerging industries such as clean energy, electronics, medical equipment and aerospace, which have great demand for high-efficiency, high-precision and high-automation manufacturing equipment. As the main supplier of machine tools in the Chinese market, CECIMO has established a good relationship with China. Our good reputation is based on innovation and the provision of high quality manufacturing solutions for overseas industries. As a sincere partner of European customers, we have provided our customers with the products they need, and have successfully provided production solutions for their customers around the world, achieving a win-win situation for both parties. At the same time, more and more European manufacturers decided to open factories in China, creating more added value and providing more employment opportunities for China. Luo Baihui welcomed the absence of any regulations, administrative and procedural interference. Free international trade rules must strive to break the implementation of policies that undermine the interests of suppliers and users. Of course, we have no doubt to ensure respect for intellectual property, because the protection of intellectual property rights is essential for any economy to achieve sustainable development.
According to statistics, since 2010, the growth rate of production and sales of the machine tool industry has been above 40%. In the next five years, the compound growth rate of the machine tool industry will be 25% to 30%, and the medium and high-end CNC cutting machine tools will become the main growth force. Luo Baihui explained that “the growth momentum comes from the continuous upgrading of existing products and the gain of international market share. On the other hand, it comes from technological R&D and product innovation, and enters the product areas supported by the state to form new growth points.â€
A recent study by GlobalIndustryAnalysts Inc. called "Machine Tool: Global Strategic Business Report" shows that the world machine tool industry is in the first stage of the rebound, and the total market value of the global machine tool market is expected to reach 2015. $80.7 billion. The report analyzes market trends, drivers, product overviews, competitiveness, innovative products and recent industry trends for machine tools worldwide. The report reviews recent weaknesses in the machine tool market caused by the global economic downturn. The report believes that the world machine tool industry is very sensitive to changes in the economic and financial environment. The economic ups and downs have affected the changes in market demand, and capacity utilization, capacity expansion and changes in business confidence have all had a major impact on the market.
The world machine tool industry faces the toughest challenges that are constantly being thrown out by the world economic downturn. At the same time, the economic downturn has far-reaching implications for the capital goods market. In addition to the weak financial environment, machine tool manufacturers are also dragged down by the processing component market, such as manufacturing, automotive and real estate. Therefore, as the economic recession draws to a close, the recovery of economic fundamentals will help the recovery of the machine tool industry. Due to the wide range of applications of machine tools, including aerospace, automotive, processing industry, wind power, mining and oil exploration, this will be beneficial to the rapid recovery of the machine tool industry, Luo Baihui, executive secretary of the International Association of Molds and Hardware and Plastics Industry Suppliers According to the analysis, although Europe and the Asia-Pacific region still occupy a large share of the global machine tool market, the recovery of the machine tool market will be mainly driven by emerging markets such as China and India. Demand for machine tools in North America is currently showing strong growth, with both production and demand growing rapidly in recent months.
Asia-Europe Machine Tool Market Interactive Development
In recent years, the demand for important equipment manufacturing industries such as national defense, aviation, high-speed rail, automobiles and molds has increased significantly, which has led to a substantial increase in the machine tool industry. The average annual compound growth rate of CNC machine tool production in China in the past five years is 37.39%. In the past 10 years, the average annual compound growth rate was 29.94%, and the compound growth in the past 15 years was 22.10%. Driven by the national revitalization of equipment manufacturing industry and international industrial transfer, China's equipment tool purchase investment growth rate will continue to maintain about 20% in the next 5 to 10 years, and the demand of the machine tool industry will continue to maintain rapid growth. Luo Baihui, executive secretary of the International Association of Moulds and Hardware and Plastics Industry Suppliers, said that under the circumstance of demand, the output of CNC machine tools in China has maintained rapid growth. With the deepening of economic restructuring, the high growth of listed companies in CNC machine tools and CNC systems and equipment. Expected to continue. In 2010, the consumption of CNC machine tools exceeded US$6 billion, and the number of units exceeded 100,000 units, indicating that CNC machine tools have become the mainstream of machine tool consumption. China's CNC machine tools market is huge in the future.
In 2010, China's CNC metal cutting machine tools grew significantly, with output increasing by 66.71% year-on-year, and the growth rate was 67.17 percentage points higher than the previous year. In the past 10 years, China's CNC metal cutting machine tool output has an average annual compound growth rate of 31.93%. The growth data for 2010 means that the development of CNC metal cutting machine tools has entered a new stage.
In terms of exports, in addition to a small number of high-end and heavy-duty machine tools, there may be breakthroughs to enter the international market; medium and low-end CNC machine tools, high-quality ordinary machine tools suitable for users' needs, as well as metal cutting tools and abrasive tools, forging and stamping tools, machine tool accessories Wait, it will still be favored by the international market and users.
On the import side, the proportion of imports of heavy-duty machine tools and expensive machine tools may continue to decline, and the import of key components required for domestic enterprises to develop high-end machine tools and large-duty machine tools will increase. Luo Baihui, executive secretary of the International Association of Mould & Hardware Plastics Industry Suppliers, pointed out that in 2011, the import and export of China's machine tool industry will continue to grow, the structure of import and export products will improve, and the European machine tool industry will recover.
According to preliminary statistics from the Italian Association of Machine Tool, Robotics and Automation Systems Manufacturers, the total output value of the industry in Italy in 2010 was about 4.23 billion euros, an increase of 3.3% over the same period in 2009. In 2010, Italian manufacturers' sales in China were 1.625 billion euros, up 3.8% year-on-year, while exports were 2.605 billion euros in the same period, up only 3.1% year-on-year. Statistics from January to September 2010 show that the total value of Italian machine tools exported to China exceeds 270 million euros, surpassing Germany to become the largest export market for the Italian machine tool industry, and the third in the US market. It is worth noting that Italian machine tools have declined in sales to traditional export markets such as Germany, the US and France, but against India (up 83.8% year-on-year), Russia (16.4%), Iran (312.5%) and Brazil. (47.7%) and other emerging markets have seen significant growth.
In Asia, India's GDP growth has reached 5%-9%, making it the second fastest growing economy in the world. The rapid growth of the Indian economy is mainly driven by agriculture, services, manufacturing, trade and construction. In order to restore industrial growth and maintain this momentum, the Indian government has adopted a series of positive responses. In the next few years, the Indian machine tool industry will strive to achieve an annual growth rate of 35%, and exports account for more than 30% of production value, and continue to maintain its low cost advantage. It is predicted that the output value of the Indian machine tool industry will increase from Rs. 1,250 crore in the 2008-2009 fiscal year to Rs. 31 billion in the 2010-2011 fiscal year. Due to the economic recovery and the prosperity of the automobile and its parts industry, the order volume has increased significantly. In two years, the growth rate of Indian machine tool output has reached 117.5%. By 2020, the industry will reach Rs 230 billion. In order to develop Indian machine tool technology, increase production, reduce dependence on imports, provide sustainable manufacturing competitiveness and enhance national security, the Indian Machine Tool Industry Association has set the localization rate of Indian machine tools to 50% in the next five years, by 2020. Increased to 67%, the industry's compound annual growth rate (CAGR) will reach 25% in the next 10 years. To this end, the Indian machine tool industry needs to invest 40 billion rupees in the next 10 years to strengthen technology research and development to enhance the competitiveness of the industry.
At present, the Indian machine tool industry consists of 450 machine tool manufacturers, of which about 33% (about 150 machine tool manufacturers) belong to the scope of enterprises with government background. In addition, India's ten major machine tool manufacturers account for almost 70% of Indian machine tools. The Hindustan Machine Tool Co., Ltd. owned by the Indian government alone accounts for 32% of the value of the Indian machine tool industry. About 75% of Indian machine tool producers are eager to obtain certification from the International Organization for Standardization (ISO) for Indian machine tool products. When the products of large machine tool manufacturers meet the needs of Indian heavy industry, the products of small-scale machine tool enterprises meet the needs of other enterprises.
The Indian machine tool industry is basically similar to the industrial developed countries, starting late but with a high starting point. The factory buildings are small but all are steel structures. Most of them have three-dimensional libraries. The products are all CNC machines with medium-end and above. They have not seen the manufacture of five-axis and large-scale CNC machine tools, but they can meet the current needs of India. There are not many employees, but the proportion of technicians and sales staff is high. English and computers are widely used, and computer applications are very popular. The annual sales revenue of these companies is about 80,000 to 90,000 US dollars, about 600,000 yuan. Enterprises generally attach importance to export and overseas market development, adapt to India's national conditions, attach importance to the implementation of turnkey projects to users, and pay attention to user services. Enterprises attach importance to corporate culture construction and humanized management, paying attention to improving the cohesiveness of enterprises.
According to the European Machine Tool Industry Cooperation Council (CECIMO), orders accepted by European machine tool manufacturers have been growing since the end of 2009. In the first half of 2010, its growth rate was almost 60% in the same period of 2009. Affected by strong growth in imports and exports in Asian markets such as China and India, all industrial products in Europe have grown. In the first half of 2010, EU-27 exports to China increased by about 40% year-on-year. Recent statistics show that although international orders are growing at double-digit rates, growth has slowed. This shows that after the economic recession, the euro zone has fallen into a sovereign debt crisis, dragging down the pace of economic recovery. Although the recovery is still going on, the current industry output is still below pre-crisis levels.
Looking at the product export line, the export of advanced technology products ranked first. In the first half of 2010, about 60% of the machinery and vehicle products of the 27 EU countries were exported to China. In the machinery industry, especially in the machine tool industry, product value comes mainly from R&D and design. European industrial strategies must ensure high investment in high value-added products. Luo Baihui, executive secretary of the International Association of Mould & Hardware Plastics Industry Suppliers, said that the European machine tool industry has traditionally been export-oriented, but European customers are still the core support of our industry. Because manufacturing has always been an important part of the European economy and the main driver of economic recovery.
President Obama put forward the slogan "The United States has to return to manufacturing," and the Japanese government has also taken measures to control the M&A of the machine tool industry. In order to completely get out of the crisis and maintain a strong European industrial base, maintaining the leading position of European manufacturing and the development of enterprises, EU policy makers expressed support for manufacturers to launch initiatives to revitalize research and development capabilities and develop new solutions.
Recently, the European Union has issued a series of initiatives, one of which is Key Energy Technologies (KET), which will play a very important role in promoting future products and services. As one of the six KET's advanced manufacturing systems, it is able to produce products efficiently, environmentally and sustainably between departments.
According to FilipGeerts, Director General of the European Machine Tool Industry Cooperation Council (CECIMO), CECIMO is a leader in the world's machine tool industry associations, mainly due to the cutting technology and perfect solutions they provide. Although their competitors have adopted a similar strategy, they still stay ahead. According to FilipGeerts, the production of the European machine tool industry in 2011 will be significantly better than in 2010, and this balanced and sustainable upward trend will continue in the next few years. However, it will not return to the 2008 level in the near future.
As the world's largest consumer of machine tools in the world, China's self-sufficiency rate in the high-end CNC cutting machine tool industry is seriously low, and there is a big gap between the design and development, materials technology, parts and components and the world's advanced countries. In the benefit of the national industrial policy, the huge demand of the downstream industry has won valuable development opportunities for China's CNC cutting machine tool industry, and continuously improved consumption capacity and infrastructure construction caused by regional revitalization planning. It has been decided that China's automobile market and construction machinery market will maintain good growth for a long period of time, which will determine the good prospects for the growth of China's CNC cutting machine tool market. Luo Baihui, executive secretary of the International Association of Mold and Hardware and Plastics Industry Suppliers, pointed out that China is making efforts to develop emerging industries such as clean energy, electronics, medical equipment and aerospace, which have great demand for high-efficiency, high-precision and high-automation manufacturing equipment. As the main supplier of machine tools in the Chinese market, CECIMO has established a good relationship with China. Our good reputation is based on innovation and the provision of high quality manufacturing solutions for overseas industries. As a sincere partner of European customers, we have provided our customers with the products they need, and have successfully provided production solutions for their customers around the world, achieving a win-win situation for both parties. At the same time, more and more European manufacturers decided to open factories in China, creating more added value and providing more employment opportunities for China. Luo Baihui welcomed the absence of any regulations, administrative and procedural interference. Free international trade rules must strive to break the implementation of policies that undermine the interests of suppliers and users. Of course, we have no doubt to ensure respect for intellectual property, because the protection of intellectual property rights is essential for any economy to achieve sustainable development.
According to statistics, since 2010, the growth rate of production and sales of the machine tool industry has been above 40%. In the next five years, the compound growth rate of the machine tool industry will be 25% to 30%, and the medium and high-end CNC cutting machine tools will become the main growth force. Luo Baihui explained that “the growth momentum comes from the continuous upgrading of existing products and the gain of international market share. On the other hand, it comes from technological R&D and product innovation, and enters the product areas supported by the state to form new growth points.â€
Extreme Heavy Duty Casters,Cast Iron Casters,Central Locking Caster,Cast Iron Caster
Guangzhou Weihang Caster Co., Ltd. , https://www.factory-metal.com