7" Casing Coalbed Methane Screw Oil Pump Tubing Anchor Catcher

Model NO.: 7"
Performance: Pumping Oil
Application: Oil and Gas
Trademark: Baofeng
Transport Package: Wooden Box / Standard Package
Specification: SGS
Origin: Shandong Weifang
Model NO.: 7"
Performance: Pumping Oil
Application: Oil and Gas
Trademark: Baofeng
Transport Package: Wooden Box / Standard Package
Specification: SGS
Origin: Shandong Weifang
Progressive Cavity Pump System (PC Pump)

Progressive Cavity Pump (PC Pump) System is a new kind of oil production equipment. The system consists of Surface Drive Head and Downhole part, electrical control cabinet.

Advantages:

It has advantages of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation and maintenance.


Driven Shaft Bevel/Gear Shaft with 63 gears:
7
7

Elevator:
7


Our workshop:
7

7
 PC pump, this new production has been widely used in recent years in oil fields at home and abroad and plays an important role in crude oil fields. Our company has committed to research and development of screw pump and its accessories for many years. We already got more than 50 kinds of screw pumps, in displacement ranged from GLB20to GLB3000, and well depth over 2300m. There are single head PC pump for ordinary crude oil physical property, high temperature PC pump adapted to 170 degree and bimetal type for 350 degree, hollow rotor PC pump applied to heating pump and flushing, uniform thickness PC pump suitable for depth over 1800m or extraction needs of crude oil contained high hydrogen sulfide, high hydrocarbon, high gas physical properties and Special type for CBM drainage gas.

The PC pump can both adapt to low viscosity crude oil and to heavy oil, high freezing point oil, high wax content oil, high sand content oil and high gas content oil. It is irreplaceable with its high advantage to help to change dried-up well to living well.

 For the use of PC pump, we have four driving head device for option, Belt Gear Reduction Transmission (horizontal), Gearless Transmission (vertical), Direct Drive Motor Gearing and Eccentric Test Gearing. According to the promotion recent years, it is a trend that the PC pump will replace the large heavy beam-pumping unit in shallow well and middle-deep well. It has advantage of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance. Along with the improvement of application technology and oil production equipment, PC Pump will be widely used in future.
PC Pump Setting Parameters
Setting depth(m) 500 600 700 800 900 1000 1100 1200
Lifting distance (mm) 550 650 750 850 950 1100 1200 1300

GLB series of PC Pump Parameters

Model 		Length
(mm)
Maxi. Diameter
(mm)
Rotor screw
(in)
Stator upper screw(in)
Stator lower screw(in)
Rod rate (rpm)
Theoretical dairy flow(m3/d)
Applicable tubing(in)
Sucker rod(in) 		Head(m)
GLB\10/35 2940 90 15/16″ 2-7/8″ 2-7/8″ 60-150 1-4 ≥73 7/8″ 1000-1400            
GLB\28/40 3650 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 3-6 ≥73 7/8″ 1200-1600
GLB\40/12 1550 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 600-800
GLB\40/14 2200 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 400-600
GLB\40/21 2330 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 700-1000
GLB\40/42 4670 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 4-9 ≥73 7/8″ 1200-1800
GLB\50/21 2380 90 1-3/16″ 2-7/8″ 2-7/8″ 60-150 5-10 ≥73 7/8″ 700-1000
GLB\75/14 2140 90 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 7/8″ 400-600
GLB\75/21 2200 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 1″ 700-1000
GLB\75/40 4410 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 6-15 ≥73 1″ 1200-1600
LB\120/18 3000 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 500-800
GLB\120/21 2932 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 700-1000
GLB\120/27 4428 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 800-1000
GLB\120/36 5865 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 1100-1400
GLB\120/40 5900 108 1-3/8″ 3-1/2″ 2-7/8″ 60-150 10-25 ≥73 1″ 1200-1600
GLB\165/35 5650 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 14-36 ≥73 1″ 900-1300
GLB\190/33 5650 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 15-40 ≥73 1″ 900-1300
GLB\200/27 5650 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 17-42 ≥73 1″ 800-1000
GLB\300/21 4850 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥73 1″ 700-1000
GLB\300/26 6000 114 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥88.9 1″ 700-1000
GLB\300/33 6200 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 25-60 ≥88.9 1″ 800-1200
GLB\420/20 4820 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 35-70 ≥88.9 1″ 700-1000
GLB\500/14 3380 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 40-80 ≥88.9 1″ 600-800
GLB\500/21 5060 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 40-80 ≥88.9 1″ 700-1000
GLB\600/18 7122 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 85-130 ≥88.9 1″ 500-900
GLB\230/2-30 6200 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 20-50 ≥88.9 1″ 900-1200
GLB\450/2-24 6520 117 1-3/8″ 3-1/2″ 2-7/8″ 60-150 39-97 ≥88.9 1″ 700-1000
GLB\800/2-16 5020 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 70-173 ≥88.9 KG36″ 500-700
GLB\800/2-24 7120 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 70-173 ≥88.9 KG36″ 700-900
GLB\1200/2-16 6640 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 103-260 ≥88.9 KG36″ 600-800
GLB\1400/2-16 7420 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 120-302 ≥88.9 KG36″ 600-800
GLB\1600/2-14 7420 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 138-345 ≥88.9 KG36″ 500-700
GLB\1800/2-14 7470 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 155-388 ≥88.9 KG36″ 500-700
GLB\2500/2-8 7470 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 216-540 ≥88.9 KG36″ 400-600
GLB\3000/2-8 7680 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 260-648 ≥88.9 KG36″ 400-600
GLB\4000/2-6 7680 117 1-9/16″ 3-1/2″ 2-7/8″ 60-150 430-1080 ≥88.9 KG36″ 400-600
GLB\75-47/K 5465 108 1-3/8″ 3-1/2″ 2-7/8″ Car Polisher

Car Polisher,Car Wax,Car Wax Polish,Mini Polisher

Foshan SUMEITE Grinding Technology Co.,Ltd , https://www.aedetail.com