Model NO.: Mo-1
Density: More Than 10.2g/Cc
Trademark: HP
Transport Package: Foamy in The Exporting Wooden Case
Specification: Thickness 0.05-50mm
Origin: China
HS Code: 8102950000
Model NO.: Mo-1
Density: More Than 10.2g/Cc
Trademark: HP
Transport Package: Foamy in The Exporting Wooden Case
Specification: Thickness 0.05-50mm
Origin: China
HS Code: 8102950000
Great price cold rolled 99.95% molybdenum sheet in Sapphire furnacemolybdenum foil/strip/sheet plate describtion:
1)Purity: ≥99.95%
2)Density:>10.2g/cm3
3)Surface:black,alkali washed,grinding,sandblasting,cold rolling
4)Size:Thickness 0.05-50.0mm  Width 20-800mm  Length 100-3000mm
5) Price: USD45-USD65/kg
6) Delivery time: 7-20days according to the order quantity
7) Shipment Methods:
   By express, by Sea or Air transportation
8) Molybdenum sheet application:
  For producing electric light source parts,components of electric vacuum
  Heat shield and heat elements for high-temperature furnace  Used to producing sputtering targets
  Processing material of molybdenum disks,sheetsandfoils
 Standard and safe Packing
1)paper wrapped the sheets, then plastic paper protected from moisture
2)Foam board around the the inner wooden case
3)Standard exported plywood case outside
Thin molybdenum sheet size and tolerance as follows:
| Thickness mm | Tolerance of thickness | Width | Tolerance of Width | Length | Tolerance of Length | |
| First Glass | Two glass | |||||
| 0.10~0.15 | ±0.01 | ±0.02 | 50~200 | ±2 | 100~1200 | ±5 |
| >0.15~0.30 | ±0.02 | ±0.03 | 50~200 | ±2 | 100~1200 | ±5 |
| >0.30~0.50 | ±0.03 | ±0.04 | 50~200 | ±2 | 100~1200 | ±5 |
| >0.50~0.70 | ±0.04 | ±0.05 | 50~200 | ±3 | 100~1200 | ±5 |
| >0.70~1.0 | ±0.05 | ±0.08 | 50~200 | ±3 | 100~1200 | ±5 |
| >1.0~2.0 | ±0.06 | ±0.10 | 50~200 | ±5 | 100~1200 | ±5 |
| >2.0~3.0 | ±0.08 | ±0.15 | 50~200 | ±5 | 100~1200 | ±5 |
| >3.0~4.0 | ±0.10 | ±0.20 | 50~200 | ±5 | 100~1200 | ±5 |
| >4.0~5.0 | ±0.12 | ±0.30 | 50~200 | ±5 | 100~1200 | ±5 |
| Â | Thickness (mm) |
Width(mm) | Length(mm) | Surface | Rolled condition |
|
Molybdenum Plate  |
8.0-16.0 | 10-1000 | 10-1000 |
Alkali washed  |
Hot rolled |
| 3.0-8.0 | 10-1000 | 10-1000 | Hot rolled | ||
|
Molybdenum sheet  |
1.5-3.0 | 10-1000 | 10-2500 |
Acid cleaning  |
Coled rolled |
| 0.5-1.5 | 10-1000 | 10-2500 | Cold rolled | ||
| 0.2-0.5 | 10-1000 | 10-2500 | Cold rolled |
Our molybdenum sheet plate and packing photoes:
We also supply molybdenum alloy plate,molybdenum copper alloy plate&MoW plate
High temperature molybdenum lanthanum(MoLa)Â alloy molybdenum plates
Molybdenum sheets:Â Thickness from 0.005 inches(0.127mm) to 0.150 inches(3.81mm)Â
Width: 20-600mm   Length: <2000mmÂ
 It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields.
Molybdenum plates:Thickness from 0.187 inches(4.75mm) to 3 inches(76.2mm)
Width:20-600mm   Length:<2000mm
 It is widely used in the construction of furnace tooling
And parts and as a feed stock for the fabrication of parts for the electronics and Semiconductor industries.
High temperature molybdenum(MoLa) alloy plate properties:
high purity and excellent creep resistance
High level of thermal conductivity,
A low coefficient of thermal expansion,
Excellent resistance to oxidation at high temperatures,
Excellent resistance to electrochemical corrosion
TZM (titanium, zirconium, molybdenum) Alloy Plate
Molybdenum's prime alloy is TZM. This alloy contains 99.2% min. To 99.5% max. Of Mo, 0.50% Ti and 0.08% Zr with a trace of C for carbide formations.
TZM offers twice the strength of pure moly at temperatures over 1300'C. The recrystallization temperature of TZM is approximately 250'C higher than moly and it offers better weldability.
The finer grain structure of TZM and the formation of TiC and ZrC in the grain boundaries of the moly inhibit grain growth and the related failure of the base metal as a result of fractures along the grain boundaries. This also gives it better properties for welding. TZM costs approximately 25% more than pure molybdenum and costs only about 5-10% more to machine. For high strength applications such as rocket nozzles, furnace structural components, and forging dies, it can be well worth the cost differential.
Moly30% Tungsten70% alloy plate
This is another moly alloy that offers unique properties. It was developed for the zinc industry. This alloy resists the corrosive effects of molten zinc. Mo/30W has also proved effective in rocket nozzles and has the potential of offering enhanced performance in applications where any erosive effects are a factor.
Our molybdenum alloy relevant products and packing photoes,hope you are interested in them:
 Great price cold rolled 99.95% molybdenum sheet in Sapphire furnace
molybdenum foil/strip/sheet plate describtion:
1)Purity: ≥99.95%
2)Density:>10.2g/cm3
3)Surface:black,alkali washed,grinding,sandblasting,cold rolling
4)Size:Thickness 0.05-50.0mm  Width 20-800mm  Length 100-3000mm
5) Price: USD45-USD65/kg
6) Delivery time: 7-20days according to the order quantity
7) Shipment Methods:
   By express, by Sea or Air transportation
8) Molybdenum sheet application:
  For producing electric light source parts,components of electric vacuum
  Heat shield and heat elements for high-temperature furnace  Used to producing sputtering targets
  Processing material of molybdenum disks,sheetsandfoils
 Standard and safe Packing
1)paper wrapped the sheets, then plastic paper protected from moisture
2)Foam board around the the inner wooden case
3)Standard exported plywood case outside
Thin molybdenum sheet size and tolerance as follows:
| Thickness mm | Tolerance of thickness | Width | Tolerance of Width | Length | Tolerance of Length | |
| First Glass | Two glass | |||||
| 0.10~0.15 | ±0.01 | ±0.02 | 50~200 | ±2 | 100~1200 | ±5 |
| >0.15~0.30 | ±0.02 | ±0.03 | 50~200 | ±2 | 100~1200 | ±5 |
| >0.30~0.50 | ±0.03 | ±0.04 | 50~200 | ±2 | 100~1200 | ±5 |
| >0.50~0.70 | ±0.04 | ±0.05 | 50~200 | ±3 | 100~1200 | ±5 |
| >0.70~1.0 | ±0.05 | ±0.08 | 50~200 | ±3 | 100~1200 | ±5 |
| >1.0~2.0 | ±0.06 | ±0.10 | 50~200 | ±5 | 100~1200 | ±5 |
| >2.0~3.0 | ±0.08 | ±0.15 | 50~200 | ±5 | 100~1200 | ±5 |
| >3.0~4.0 | ±0.10 | ±0.20 | 50~200 | ±5 | 100~1200 | ±5 |
| >4.0~5.0 | ±0.12 | ±0.30 | 50~200 | ±5 | 100~1200 | ±5 |
| Â | Thickness (mm) |
Width(mm) | Length(mm) | Surface | Rolled condition |
|
Molybdenum Plate  |
8.0-16.0 | 10-1000 | 10-1000 |
Alkali washed  |
Hot rolled |
| 3.0-8.0 | 10-1000 | 10-1000 | Hot rolled | ||
|
Molybdenum sheet  |
1.5-3.0 | 10-1000 | 10-2500 |
Acid cleaning  |
Coled rolled |
| 0.5-1.5 | 10-1000 | 10-2500 | Cold rolled | ||
| 0.2-0.5 | 10-1000 | 10-2500 | Cold rolled |
Our molybdenum sheet plate and packing photoes:
We also supply molybdenum alloy plate,molybdenum copper alloy plate&MoW plate
High temperature molybdenum lanthanum(MoLa)Â alloy molybdenum plates
Molybdenum sheets:Â Thickness from 0.005 inches(0.127mm) to 0.150 inches(3.81mm)Â
Width: 20-600mm   Length: <2000mmÂ
 It is used for fabrication of sintering boats, high temperature furnace heating elements and heat shields.
Molybdenum plates:Thickness from 0.187 inches(4.75mm) to 3 inches(76.2mm)
Width:20-600mm   Length:<2000mm
 It is widely used in the construction of furnace tooling
And parts and as a feed stock for the fabrication of parts for the electronics and Semiconductor industries.
High temperature molybdenum(MoLa) alloy plate properties:
high purity and excellent creep resistance
High level of thermal conductivity,
A low coefficient of thermal expansion,
Excellent resistance to oxidation at high temperatures,
Excellent resistance to electrochemical corrosion
TZM (titanium, zirconium, molybdenum) Alloy Plate
Molybdenum's prime alloy is TZM. This alloy contains 99.2% min. To 99.5% max. Of Mo, 0.50% Ti and 0.08% Zr with a trace of C for carbide formations.
TZM offers twice the strength of pure moly at temperatures over 1300'C. The recrystallization temperature of TZM is approximately 250'C higher than moly and it offers better weldability.
The finer grain structure of TZM and the formation of TiC and ZrC in the grain boundaries of the moly inhibit grain growth and the related failure of the base metal as a result of fractures along the grain boundaries. This also gives it better properties for welding. TZM costs approximately 25% more than pure molybdenum and costs only about 5-10% more to machine. For high strength applications such as rocket nozzles, furnace structural components, and forging dies, it can be well worth the cost differential.
Moly30% Tungsten70% alloy plate
This is another moly alloy that offers unique properties. It was developed for the zinc industry. This alloy resists the corrosive effects of molten zinc. Mo/30W has also proved effective in rocket nozzles and has the potential of offering enhanced performance in applications where any erosive effects are a factor.
Our molybdenum alloy relevant products and packing photoes,hope you are interested in them:
Â
Bolt Machine Mold And Parts,Cemented Forming Die,Hard Alloy Screw Main Die,Main Die Forming Dies
Hebei Yuanyue Trading Co.,Ltd , https://www.hbyuanyue.com