(2) Leak detection method: use soapy water and other leak detection liquids to change the exposed pipelines, closed doors, flanges and welds, etc., leaking and leaking, and will bubble up at the leak point, and continue to grow. . This method is not suitable for low temperature climates below 5 °C.
(3) Pressure method: close the valve at both ends of the pipeline and check the pressure of the pipe network. If the pressure drops rapidly, it indicates that the pipeline has leakage. Then through the segmentation test and press, it is advisable to find the leak point.
(4) Adding odor method: Participate in the chemical odorant such as trace PTFE, and use the odor to find the leak point.
(5) Ultrasonic testing method: The ultrasonic pulse reflection principle is used to measure the thickness of the steel pipe wall after corrosion, and the thick wall of the large diameter pipe is accurately detected. The internal and external wall corrosion of the pipeline, the deformation of the pipeline, the stress corrosion cracking and the defects in the former wall, such as slag inclusion, are then investigated and leaked and positioned.
(6) Hydrogen tracer method: Participate in a small amount of hydrogen in the pipeline, and use the sensitivity of hydrogen to select a professional probe to detect the leak point. This method is mostly applied to artificial gas detection and small leak detection of small diameter.
(7) Electronic marker method: submersible marker, through the probe to intermittently send a certain frequency signal, can quickly and accurately find the location, and can know the pipeline situation according to the GIs system, such as the bend of the pipeline, the slope of the dead and the gas There are no other pipelines or underground space around the pipeline to avoid unnecessary troubles during the excavation. The principle of the electronic marker method is shown in Figure 6-13.
(8) In-tube intelligent climbing method: Using vanadium climbing (intelligent robot) to detect the pressure, flow, temperature and the degree of wall in the tube, after disposing the data recorded in the crawler, it can distinguish whether the pipeline is leaking. Zaoqiang County Tengda Gas Pressure Regulator Co., Ltd. gas regulator customer centering.
(Source: Hebei Zhenxing Gas Regulator Co., Ltd. gas pressure regulator http://)
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Roof Rock Wool Insulation Board
Yu Ou Nuo Roof Rock Wool Insulation Board are suitable for fire prevention, heat preservation and heat insulation of external walls and roofs. Rock wool board is a kind of external wall thermal insulation material, with good thermal insulation effect, low thermal conductivity, high A1 fire grade, non flammability, strong high temperature shrinkage resistance, high quality and low price, which is convenient for construction and installation.Rock Wool Boardis an inorganic fiber board made of basalt as the main raw material through high temperature melting processing , is widely used in petrochemical, textile metallurgy, power transportation, construction agriculture and other fields.
The artificial inorganic fiber made of rock wool board by high temperature melting process has the characteristics of light weight, small thermal conductivity, heat absorption and incombustibility. The initial development is a common type of application in construction, which is mostly used in industrial buildings. Rock wool is a kind of external insulation material. When the market share of 90% of the organic thermal insulation materials is stagnant, rock wool, as an inorganic thermal insulation material for exterior wall, has ushered in an unprecedented market opportunity.
Roof Rock Wool Heat Insulation Board,Roof Insulation Compressed Rockwool Board,Roofing Waterproof Rock Wool Board,Roof Waterproof Stone Wool Board
Zhengzhou Ou Nuo Building Materials Co., Ltd. , https://www.yuounuo.com