The province consumes only 1/10 of the electricity consumption of the general air conditioner, and the power consumption is low. It is an affordable and practical air conditioner that the family can afford.
The cooling fast cooling effect is not affected by the hot weather, and the hotter the weather, the better the cooling effect. The flow rate of the refrigerant is large, the heat exchange area of ​​the evaporator is large, and the process from the high temperature to the comfortable temperature is faster than the general air conditioner.
No pollution, no Freon refrigerant, no chemical pollution, no exhaust gas waste heat, pure natural environment-friendly products.
Noise-free gas-water separation technology completely eliminates water flow noise in air conditioners.
The water-saving technology adopts the gas-water separation technology to implement the closed-type equal water intake and water, without wasting or polluting the groundwater source.
Comfortable moderate dehumidification is not too dry, the relative humidity is always 60-65% of the human body's most comfortable level, overcoming the excessive moisture of the well water air conditioner and the excessive drying of the Freon air conditioner.
Healthy air purification ability, continuous generation of negative ions, soft, cool and refreshing forest-like natural environment, no air conditioning disease.
Efficient use of gas-water separation technology to increase the density of water and improve water temperature transmission efficiency, combined with a special evaporator to make full use of natural cold air, air conditioning air temperature is close to water temperature, under the same water temperature conditions can be reduced by 4-5 ° C compared with the general water temperature air conditioning.
Water and water
Natural air-conditioning, air-conditioning, air-conditioning, energy-saving, environmentally-friendly operation costs should be promoted, because the general well water-conditioning does not solve the problem of well water recharge, and the large-scale exploitation of groundwater can only be used to destroy the ecological environment. This is the fundamental reason that well water-conditioning can not be promoted. the reason. Water is the source of life, and water is a precious resource. The use of geothermal air conditioning to save electricity must not be at the expense of wasting and polluting groundwater. Lingtian Technology has developed a series of water and water reclaiming equipment for solving the problem of groundwater air conditioning well water recharge. Not only does the household ground temperature air conditioning water reclaiming system with a few tons of water flow per hour, it is very mature, dozens or even hundreds of tons of water per hour. The large-flow ground temperature central air-conditioning water reclaiming project has also accumulated a lot of successful experience, and the shape has become a set of ground temperature air conditioning water and water underground engineering design and construction theory, providing free construction and installation technical training and engineering design technical support for dealers.
Features:
1. Energy saving: by inputting 1kw electric energy to the central air conditioning system of the water source heat pump,
Get more than 4.5kw of heat (cold), can meet the air conditioning requirements of 40-60m2 building. At the same time, the single unit energy efficiency ratio of the unit is high, the heating performance coefficient is as high as 5.5, and the cooling energy efficiency ratio is as high as 6.0 or more. Compared with the air-cooled heat pump air conditioner, the operating cost is saved by more than 40%.
2. Environmental protection: The central air conditioning system of the water source heat pump does not emit pollutants harmful to the environment.
The underground energy remains in an overall balance without consuming, destroying or polluting water resources. Replace the boiler system when heating, no combustion process, avoid smoke pollution; no cooling tower is needed for cooling, avoiding noise and mold pollution of the cooling tower, and keeping the environment clean.
3, water saving: water as the source, absorb or release heat to achieve heating
Or the role of refrigeration, neither water consumption nor pollution.
4. Economy: The initial investment is lower than the traditional central air conditioner, which is only the traditional refrigeration and heating investment.
1/2 to 2/3, and the operating cost is only about 50% of the traditional central air conditioner.
5. Reliable: It adopts microcomputer intelligent control system and has remote monitoring function. selected
With internationally renowned brands of accessories and components, the service life is more than 15 years.
6. Safety: There is no hidden danger of hot river explosion or burning.
7, province: the computer room covers a small area, the unit is flexible, can be placed in the basement
Or in any building room, there is no need for a boiler room and its associated coal yard and slag yard to save floor space and save construction costs.
8. Stable: The system operates stably and is not affected by any weather conditions.
(1) stainless steel polishing machine output good beam quality, including mode and mold stability; (2) stainless steel polishing machine output power is large enough (this is the key to speed and effectiveness), whether the energy is stable (usually requires stability of 2%, in some occasions is required 1%, so as to process the ideal effect); (3) stainless steel polishing machine should have high reliability, should be able to work continuously in harsh industrial processing environment; (4) stainless steel polishing machine itself should have good maintenance, fault diagnosis and chain function, downtime should be short; (5) the operation is simple and convenient, the control key function is clear, can refuse illegal operation, protect the stainless steel polishing machine from damage. Stainless steel polishing machine should follow the principle of purchase: stainless steel polishing machine technology has many valuable characteristics. However, specific to a product is suitable for the use of this technology, should follow the following principles :(1) with other existing methods can not be solved, only with polishing processing method to solve; (2) the existing other processing methods can be solved, but if the polishing processing method can greatly improve product quality, improve production efficiency and significantly increase economic and social benefits; (3) to fully consider the processing process with polishing processing related to those matching links; (4) to pay attention to the application of polishing processing and conventional processing composite processing technology, in order to make full use of their strengths
Metallographic Polish ,Struers Polishing Cloth Polishing,Struers Polishing Disc,Trojan Polishing Consumables
TROJAN (Suzhou) Technology Co., Ltd. , https://www.troolymaterial.com