Hardware Technology: Magnetic pump routine maintenance and repair

Magnetic pump five maintenance instructions: 1, the shaft broken magnetic pump shaft material is 99% alumina ceramic, the main reason for the shaft is broken, because the pump is running, the shaft bearing dry grinding and the shaft twist off. Open the pump inspection can be seen when the bearing has been seriously damaged to prevent the pump broken off the main method is to avoid the air pump running. 2, bearing damage Magnetic pump bearings are made of high-density carbon, in case of pump water or pump impurities, it will cause the bearing damage. Cylindrical shaft coupling inside and outside the rotor between the coaxial requirements if not guaranteed, will also directly affect the bearing life. 3, Lack of head causes of such failures are: there is air in the transmission medium, the impeller is damaged, the speed is not enough, the proportion of liquid to be transported is too large, and the flow is too large. 4, the lack of flow caused by lack of flow are the main reasons: impeller damage, speed is not enough, the lift is too high, the tube has debris clogging 5, the magnetic pump can not play the liquid. Magnetic pump can not play the liquid pump is the most prone to failure, its reasons are more. First of all, check whether the pump suction pipe leaks, check the suction pipe air is exhausted, the amount of liquid filled in the magnetic pump is sufficient, inhalation tube whether there is debris clogging, check whether the pump is reversed (Especially after changing the motor or overhauling the power supply line), you should also pay attention to whether the suction height of the pump is too high. If the above inspection still can not be solved, the pump can be disassembled and checked to see if the pump shaft is broken. Check whether the moving ring and the static ring of the pump are intact, and whether the entire rotor can move in a small amount. If the axial movement difficulties, can check whether the carbon bearing with the pump shaft is too close.

Gas stove Safety Valve

Gas Oven Safety Valve,Gas Safety Valve,Gasstove Oven Safety Valve,Safety Gas Oven Valve

GUOLONG PRECISION VALVE CO.,LTD , https://www.glstovevalve.com