The sound of the sounder on the working bearing

Source: China Bearing Network Time: 2018-01-09

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Select the sounder to check the size and sound quality of the rolling sound of the bearing in operation; even if the bearing has slight peeling and other damage, it will announce the abnormal sound and the irregular sound; the sounder can be distinguished.
Using auditory to identify irregular work is a very general approach. For example, using an electronic stethoscope to detect abnormalities in a part is often experienced by the operator.
If the bearing is in an excellent transition situation, it will announce a low humming sound. If a sharp voice is announced; the voice and other irregular sounds; often indicate that the bearing is in a bad connection situation.
Sharp å±å± noise can be caused by improper smoothness. Inappropriate bearing clearances can also form metal sounds. The dents of the concave trajectory on the outer ring track of the bearing can cause oscillation; and form a smooth and loud sound. Because the knocking flaws formed by the device will also cause noise; this noise will be different from the bump of the bearing speed.
If there is intermittent noise, it means that the rolling part can be damaged. This sound is an attack when the damaged appearance is overburdened; if there is a pollutant in the bearing, it often causes a squeak. The severe same bearing damage will occur irregularly. And grand noise.
Bearing damage can of course be detected by hearing; however, it is now common for the bearing to be replaced immediately. Therefore, better methods such as the use of skf electronic condition monitoring equipment (Electronic Condition Monitoring). Compared to the old method Use a wooden stick or a screw to abut the bearing housing; the other end is attached to the ear; the new invention can ensure a safer; more accurate prediction of the bearing.

Recommend to friends comments close window

Bearing related knowledge

Analysis of the comparison test in the national watch: hub bearing seal layout slewing bearing grease machine technical parameters and functional analysis of the bearing in the bearing and other parts of the high temperature bearing device key
The four primary reasons for NTN bearing failure

This article links to http://
Please indicate the bearing network http://

Previous: Bearing grinding machining skills: The type of sliding bearing damage (1)

Channel Drain Shower

Channel Drain Shower,Tile Insert Square Channel Drain,Anti Odor Stainless Steel Shower Drains,Tile Insert Adjustable Shower

Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.jmpowerdrain.com