Heating common fault solution

With the arrival of heavy snow in Beijing on the weekend, the temperature plummeted. This year's heating has also been advanced a lot, but many home heating is still not hot, in fact, know the following methods, these problems can be easily solved.

It may be caused by rust or rust in the heating system or air blockage in the heating system, which may cause the water circulation of the system to be blocked. Then the unreasonable design of the radiator causes the system water circulation to approach the road, and it can also cause half of the heat to be half cool. In this case, the valve of the return pipe can be closed.

Heating and venting and common troubleshooting methods

1. The heating is not hot overall

This fault occurs, generally the valve before the heating is turned off, and the supply and return valves can be opened.

2. Half of the heating is not hot, and there is water in the heating.

The reason for this failure is that the air in the heating is not cleaned, and the air valve needs to be opened to deflate until there is water flowing out.

At the other end of the heating control valve, there is a deflation valve that can be adjusted with a screwdriver. Rotate counterclockwise to release the air from the heating, and the heating can be heated. It is necessary to deflate several times, not enough to put it clean once and twice, once every other time. Until it is exhausted. The heating venting valve of the bathroom is at the top of the heating.

Remind you: If the fault cannot be eliminated after the operation, notify the maintenance personnel.

3. In one household, some heating and heating are not hot.

This situation occurs mainly because the flow rate of each heating is not uniform, that is, the resistance distribution is uneven, and the inlet valves of the respective radiators need to be separately adjusted. Once debugged, this issue can be resolved.

4. The heating in the house is very hot, but the temperature in the room is very low.

In this case, the selected heat sink is too small, and the number of heat sinks needs to be increased. Therefore, when purchasing a radiator, you must actually measure it, and calculate the size of the radiator according to the comprehensive factors such as orientation, surrounding environment and pressure.

5. Common faults: The heating line is not hot enough and the room temperature is too low. Remedy: The inlet water temperature is low and the inlet water temperature is increased. By property inspection system.

6. Common faults: water leaks in the inlet and outlet valves (near the heating direction). Remedy: Close the inlet and outlet valves. Notify the installation team to repair.

7. Common faults: Water leakage outside the inlet and outlet valves (close to the main line). Remedy: notify the property of the semi-closed system valve; notify the installation team for maintenance.

Advertising Lighting

Advertisement lighting is a special lighting solution used to highlight and illuminate advertising media such as billboards, light boxes, signboards, in order to attract people's attention and effectively convey advertising information.

Billboard lighting uses LED technology as a light source, LED with high brightness, high energy efficiency, long life and other advantages. By precisely controlling the brightness and color temperature of the LED, rich colors and visual effects can be presented, thus making the advertisement more vivid and attractive.

In advertising display lights, lighting layout is very important. Generally, according to the shape and size of the advertising media, as well as the importance and key points of the advertising content, the design of a suitable lighting scheme. Through the distribution and angle setting of the lamps, it can ensure that the entire advertisement is evenly illuminated, avoiding dark or over-exposed areas, so as to improve the visibility and recognition of the advertisement.

In addition, outdoor advertising lighting can also be applied to some special effects, such as flashing, changing colors, gradients, etc., to attract attention and increase interest. The choice of these effects usually depends on the theme of the AD and the goal of the campaign.

Advertising sign lighting is widely used in commercial environments, including shopping malls, shops, roads, subway stations and so on. It can not only attract the attention of consumers, increase brand exposure and sales opportunities, but also create a unique urban landscape at night to enhance the beauty and vitality of the city.

Advertisement Lighting,Billboard Lighting,Advertising Display Lights,Outdoor Advertising Light,Sign Lighting

SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.szlitehomelight.com