How much does the floor tile labor cost? A square meter expert Weapon: How to avoid the decoration budget trap

Floor tiles are ground decoration materials, also called floor tiles. Made of clay. A variety of specifications. Hard, wear-resistant, moisture-proof. Some are glazed and have a decorative effect. Mostly used for floors and floors of public buildings and civil buildings. So, do you know how much is a square meter of floor labor costs ? The price must include material prices and labor prices. In artificial prices, people must be concerned about area comparisons, such as floors, walls, ceilings, and so on. Well, today I will explain to you how much money is spent on the construction of floor tiles , and how to avoid the decoration budget trap.

How much is a square meter of labor costs for paving tiles?

In fact, labor costs are generally 30-50 yuan / square meter, the specific must be determined by the decoration company. Prices vary from place to place in each period. Therefore, the specific labor cost requires the owners' friends to inquire a little, and the prices are basically within this range.

Kunming floor tile specific price

Tile specifications are: 100 * 100, 15 * 15 and 800 * 800 prices are the highest is generally 48 yuan a square;

Tiles specifications: 300 * 600 300 * 450 General 42-45 yuan a square.

  

Tile laying cautions

1. The laying temperature of the floor tiles should be higher than 10°C. Before laying, floor tiles must be face down and placed on the construction site for more than 24 hours so that the floor tile temperature is the same as the room temperature. Keep room temperature as constant as possible during the laying process.

2, in addition to the square floor tiles, but also can be randomly cut into a variety of shapes such as triangles, rectangles.

3, before laying, first draw a cross-shaped reference line on the ground

The method is: to measure the size of the ground, draw a vertical or horizontal line in the center of the ground, and then use the center of the line to make a vertical line. When the floor tiles are slanted, the crosshairs are drawn at a 45° angle from the original reference line. For best results, the floor tiles at the edges should be at least half the floor tiles, if less than half, the crosshairs can be translated by 1/2 floor tile width. The laying of floor tiles should extend from the center of the ground to the surrounding area.

  

Tile floor knowledge:

Matters needing attention First, determine the decoration style, consider the individual needs

When purchasing floor tiles, we must first consider our own overall style, determine the approximate color tone of the tiles, in order to coordinate with the overall style of the room, but also pay attention to consider some of their own personalized needs, the floor tiles are now divided into two major Category: vitrified tiles and glazed tiles, now commonly known as antique bricks are mostly referred to glazed tiles!

Matters needing attention two, the way of paving the floor tile

There are two main methods that are most commonly used now: straight and oblique shops.

Shop: Paving in rows parallel to the wall, this is the most commonly used way of paving.

Inclined shop: Paving with a wall at a 45-degree angle, this way is relatively cost-effective.

Note three, determine the specifications of floor tiles

Consider the following two aspects when considering the specifications of the floor tiles: First, the size of the living room, do not blindly pursue large-size floor tiles. In general, 600*600 specifications are recommended below 40 square meters, and 800*800 specifications are recommended for over 40 square meters. When choosing, you must also consider the actual area that people can see when the house is finished with furniture. If the viewing area is small, and the specifications of the bricks are too large to be coordinated, the second is to pay attention to the same series of tiles. The larger the specifications, the higher the price, and the province where the decoration can be saved must be saved!

Editor's summary: The above is how much the floor tile labor costs a square meter of expert advice: how to avoid the decoration budget trap related to the introduction, hoping to help meet the needs of the friends! For more information, please continue to follow our website, follow-up will show more exciting content. You can also purchase more of your favorite products on Qijia Mall!

How to avoid the renovation contract trap decoration traps flat meters decoration budget knowledge decoration budget

Medical Industry Mass Flow Meter

Sealand is a professional manufacturer of Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter, ATEX, IECEx & CE approved.

There are 2 optical switches for operation. The SET and SELECT optical switches are used to navigate the transmitter display. To activate an optical switch, move your finger 1~2mm over the optical switch close to the glass.






Mark:
1. The display will timeout without any operation in 5 min.
2. During numbers input, the decimal point will come up automatically if the first digit is 0; if not 0, please activate SELECT until decimal point shows up.


The general operation is listed as follows.

On Main Interfaces

Activate SET to alternate mass and volume values.

Activate SELECT to alternate main interfaces.

Long activate SELECT to go to Setup Interface.



Long activate SET for total reset.




Back to Main Interface



Long activate SET & SELECT at the same time.




Select Submenu, Parameters & Numbers

Activate SELECT to select the submenu, parameters or numbers.

Activate SET to go to submenu or save parameters/numbers.

Save setup

Long activate SET to save the modified setup.

Back or Exit

Long activate SELECT.








Medical Mass Flow Meter, Medical Mass Flowmeter, Medical Coriolis Meter, Medical Flow Meter, Medical Flowmeter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com