How to check the decoration of the door? This is a lot of problems for home improvement friends are concerned about, and now will be learned about the acceptance of the installation standards for door and window frames for everyone to help you easily solve this problem.
The Wardrobe Wardrobe Sliding Door     Zexi parquet
Determine the opening direction of the door and window and the position of the door lock according to the decoration drawings. After the plug door window frame skin should generally be lower than the beam 10 ~ 15mm, the window frame skin should be 50mm above the windowsill skin height, if the hole height is slightly larger or smaller, the window frame should be adjusted up and down to ensure that the beam Gray thickness and slope outside the window sill.
When installing windows and doors, you must carefully plan and draw lines accurately. The first time the planing should not be too much, the second time the planing is done without leaving the line and not eating the line, and the planing is accurate to ensure the installation quality.
The installation of the hardware must be completed in accordance with the design of nailing, location, and must not be missed. Wooden screws are forbidden to enter once, and wind hooks are not allowed to enter once.
There is a door and window frame with a face, and a door and window frame with a standing wall. The thickness of the plastering should be 15 to 18mm before the frame is erected, so that the door frame and the plaster surface are flat.
Door purchase construction acceptance window and window decoration design decoration decoration
Ferrous Sulfate Co., Ltd. , http://www.nssulphate.com