Glass can enhance the transparency of the room, will not feel depressed in the design process of small units, designers usually use some simple techniques, and at the same time select some materials and colors that show strong effect, so that the area is not large The space is less crowded. On the other hand, glass is the material of choice. This is because the display effect of the glass material is transparent, especially the use of the glass frame in the cabinet, so that people do not feel depressed.
Mei Qi Li cabinets
Choose metal materials with strong visual impact and strong affinity colors
Careful people will find that in smaller kitchens, designers are less likely to design darker cabinets. The color of cabinets should be based on single colors and light colors. Darker colors such as black and dark brown should not be used. White, light gray or bright milky yellow or light blue are all good choices.
Can use induction cooker without gas stove
Since the space in the kitchen is small, if the width of the kitchen is narrow, cabinets with corners should not be chosen because that may make the space appear smaller. However, if the width is wide, you should make full use of the corner space to make full use of the space at the corner, such as using a basket to place more pots and pans. As for cooking stoves, the two kitchens used in the small kitchen were adequate, and their width was also suitable.
If it is a single apartment with a small area, it is nowadays more popular to replace the gas stove with an induction cooker, because the use of an induction cooker can achieve the effect of environmental protection. In combination with the daily eating habits of single nobles, it is recommended that hoods can be omitted and the setting of the wells can be omitted, which will save the interior space of a single apartment.
Hardware - door panel installation
Although it is a small kitchen, there should be no less one function, especially many subtleties. If a small kitchen is used less often than a large drawer, the number of use of the door will increase, and the opening and closing of the door will be repeated several times a day, so that the function of the hinge is highlighted. If a plastic part is installed on the door panel, Make sure there is sufficient connection strength between the connector and the cabinet so that the corner chain will not loosen or fall off.
The wall cabinets of the kitchenettes are also particularly important because there may be a lot to put, so the safest lifting code should be used to meet the maximum load.
Wall - Choose a single light-colored wall
When decorating and decorating the kitchen, it is not only necessary for each side to have color, but also brightness, because the use of a small kitchen area is very limited, so in the overall arrangement of colors, should not be colorful. Special attention should be paid to the inability to use decorative materials with printed patterns or strong contrast between the light and shade, which would not only make the kitchen area appear visually narrow, but also easily create illusions of roughness. The color arrangement of the wall should be dominated by white or light colors, and colors with excessive contrast should not be used.
Ground - simple and clean is the first choice
The color and pattern of the kitchen floor are also very important. The plain floor will show all the stains clearly. The selection of spots or patterns on the floor will save the cleaning time. The light floor will make the house brighter. The dark floor will make the room darker and the eye-catching. The pattern will make the room feel cluttered, so paving the simple floor in the kitchenette is always the right choice. If there is no problem with ground loading, there are a variety of floor tiles to choose from, such as granite, ceramic tiles, terra cotta, wood, vinyl, cork or linen linoleum.
If it is a single apartment with a small area, it is nowadays more popular to replace the gas stove with an induction cooker, because the use of an induction cooker can achieve the effect of environmental protection. In combination with the daily eating habits of single nobles, it is recommended that hoods can be omitted and the setting of the wells can be omitted, which will save the interior space of a single apartment.
Experiences Space Effects Tuder Flooring Space Induction Cooker Glass Room Decor Black Flooring Glass Brick Drawer Cabinet Door Glass Door Cabinet Door Panel Kitchen Wall Tile Kitchen Cabinet Door Floor Tile Glass Door Cabinet Door Kitchen Glass Sliding Door Floor Tiles Apartment Decoration Single Apartment Decoration Kitchen Tiles
- Corner Cubes / Solid Retro Reflectors (CCP):Corner cubes are excellent retro-reflectors. They return an incoming beam in the opposite direction along the same path. They produce a two dimensional 180° beam deviation making them useful for alignment purposes. These prisms are manufactured from BK7A or Fused Silica and may be selected to have 2, 5 or 10 arc sec angular deviation tolerance. The prisms are supplied uncoated but Lambda can apply anti-reflection coatings to the entrance face and protected metallic coatings to the three cube corner faces as required.
- Dove Prisms (DVP):Dove prisms are routinely used to invert images or as optical delay lines. They are supplied uncoated but a variety of coating options are available. UV Fused Silica prisms are recommended for high power applications.
- Equilateral Prisms (EQP):Equilateral prisms are normally used as dispersing prisms. As well as standard BK7 prisms, higher index. SF2 and F2 prisms are offered to increase the dispersive power.
- Isosceles Brewster Prisms (IBP):Brewster Prisms are isosceles prisms arranged to have an apex angle which permits a ray entering at the Brewster angle to pass at minimum deviation. They are ideal for selection of wavelengths or tuning of laser output. If required for use with femto-second lasers please contact us and ask for the ultra-fast version.
- Littrow Dispersing Prisms (LDP):Littrow prisms are retro-reflecting Brewster prisms. They are arranged to that a beam entering at the Brewster angle falls normal to the flat surface and is reflected back along the same path. They are useful in laser cavities where the wavelength of the return beam can be selected by tilting the prism slightly. In this way the gain of the cavity can be tuned to a specific laser line.
- Pellin Broca Prisms (PBP):Pellin Broca prisms are constant deviation (90°) dispersing prisms. The input angle is arranged so that total internal reflection occurs at the internal face. This will provide a constant 90° deflection for the beam with dispersion. If the input beam enters the long side of the prism the longer wavelengths will be deviated less. These prisms provide a convenient way to compensate for group velocity dispersion in ultra-fast lasers or to separate harmonic wavelengths in an incoming laser beam.
- Penta Prisms (PTP):Penta prisms are extremely useful in alignment systems as they define a right angle very precisely and independently of angle of incidence. Rays entering one face emerge from the adjacent face at precisely 90° after they have undergone two reflections inside the prism for a total of 270°. The penta prism acts as a turning mirror which is insensitive to alignment. For custom applications, anti-reflection coatings are applied to the entrance & exit surfaces. Either metallic or dielectric high reflector coatings are applied to the 2 reflective surfaces.
- Porro Prisms (PRP):Porro prisms are sections of a right angle prism. They are specifically intended for 180° folding. These Porro prisms are circular in cross section and have a λ / 10 polished input face. An incoming beam is totally internally reflected at the roof faces and returned in the opposite direction within 10 arc sec.
- Rhombic Prisms (RP):Rhombic prisms are used to displace a beam laterally without changing its direction. They may be coated to transmit part of the beam and produce two parallel and displaced emerging beams. Can be coated to produce a polarizing beam separator. These prisms are manufactured from either BK7A or Fused Silica. They are supplied uncoated but many coating options are available.
Optical Prisms,Littrow Dispersing Prism,Optical Optical Prisms,Glasses Optometry Prisms
Lambda Research Optics ChangChun,LTD. , https://www.lambdachina.com