Marine System Oil 4008

Trademark: SINOPEC
Origin: China
HS Code: 2710199100
Trademark: SINOPEC
Origin: China
HS Code: 2710199100
SINOPEC marine system oil 4008 is prepared from a paraffin-base mineral base stock by blending with selected additives of superior performance.The product is approved by MAN B&W through a 6,000hrs field test.The formulation is specially designed for lubrication of the crank case in marine low-speed cross-head diesel engine burning fuels with sulfur content of 1.0%~3.5%, trunk piston diesel engine using fuels of lower sulfur content, rear-end shaft and other auxiliary equipment.
Advantages:

*Outstanding water separation capability to rapidly remove the moisture from oil and ensure stable lubrication performance.

* Excellent anti-oxidation and thermal stability to reduce the oil oxidation rate and extend the life of use.

*Excellent detergency and dispersancy to disperse carbon deposit or oil sludge into fine particles suspending in oil, thus keep the engine in clean state.

*Excellent anti-rusting and corrosion-proof performance to protect individual parts and the whole engine.

Recommended Application:

*Marine system oil 4008 is suitable for lubrication of the crank case in marine low-speed cross-head diesel engine burning fuels with sulfur content of 1.0%~3.5%.

*The product is also suitable for lubrication of trunk piston diesel engine using fuels of lower sulfur content, or use on rear-end shaft and other auxiliary equipment
Health & Safety

*Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS).MSDSs are available upon request through your sales contract office.

* This product should not be used for purposes other than its intended use.

* If disposing of used product, take care to protect the environment. SINOPEC marine system oil 4008 is prepared from a paraffin-base mineral base stock by blending with selected additives of superior performance.The product is approved by MAN B&W through a 6,000hrs field test.The formulation is specially designed for lubrication of the crank case in marine low-speed cross-head diesel engine burning fuels with sulfur content of 1.0%~3.5%, trunk piston diesel engine using fuels of lower sulfur content, rear-end shaft and other auxiliary equipment.
Advantages:

*Outstanding water separation capability to rapidly remove the moisture from oil and ensure stable lubrication performance.

* Excellent anti-oxidation and thermal stability to reduce the oil oxidation rate and extend the life of use.

*Excellent detergency and dispersancy to disperse carbon deposit or oil sludge into fine particles suspending in oil, thus keep the engine in clean state.

*Excellent anti-rusting and corrosion-proof performance to protect individual parts and the whole engine.

Recommended Application:

*Marine system oil 4008 is suitable for lubrication of the crank case in marine low-speed cross-head diesel engine burning fuels with sulfur content of 1.0%~3.5%.

*The product is also suitable for lubrication of trunk piston diesel engine using fuels of lower sulfur content, or use on rear-end shaft and other auxiliary equipment
Health & Safety

*Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS).MSDSs are available upon request through your sales contract office.

* This product should not be used for purposes other than its intended use.

* If disposing of used product, take care to protect the environment.

Gantry type high speed plate drilling machine

1.The bed is made of high quality gray cast iron,no need foundation.

2.Double side lead screw synchronous driving system,stable performance,flexible movement,accurate positioning.

3.Adopt Taiwan BT40 high speed internal cooling precision spindle,can adopt hard alloy internal cold drill bit,processing efficiency very high.

4.SIEMENS 808D CNC + servo motor control,can directly transfer Auto CAD drawings to general processing program.

5.Automatic chip removal,cooling liquid recycling.




Gantry Drilling Machine,Steel Drill Machine,Drill Machine For Steel,Steel Plate Drilling Machine

Shandong EN FIN CNC Machinery Co., Ltd , https://www.sdfincncmachine.com