1. High tensile strength
The latitude and longitude tensile strength of the needle felt filter bag is above 2000 Newton, about twice as high as that of the chemical fiber filter, and the elongation at break is between 3 and 10%, which indicates the dimensional stability of the filter material in use. Good, not easy to stretch and deform, use the effect of cleaning, and extend the service life.
2. Can significantly improve temperature resistance
The high-temperature filter made of carbon fiber and metal fiber can withstand temperatures up to 400. Above C. The temperature resistance level of flumes (r) (FMS(r)) 9806 filter felt produced by mixing P84 fiber with other high temperature resistant fibers is significantly higher than that of P84 high temperature felt made of pure P84 fiber. In the experiment, Flumes 10 ([email  protected]) 9806 was placed at 300. The oven of C was placed for 24 hours, and its shrinkage rate was less than 1% in the laboratory, and the strength was not lowered substantially.
3. Can significantly improve wear resistance
Compared with the glass fiber needle felt, the wear resistance of the Flumes filter material was significantly improved by the flat grinding test machine. (Flumis filter media wear resistance 2200 - 3,000 times, glass fiber filter wear resistance 538 times).
4. Can significantly reduce the running resistance
Because the chemical fiber which is easy to be needled and finished after surface treatment is mixed into the glass fiber, it is more conducive to the smoothing and compaction of the filter felt, the surface is smooth and smooth, easy to clean, and the running resistance is low, if the P84 fiber layer is laminated The surface of the filter mat has a better surface filtering effect.
5. It can significantly increase the filtering wind speed and reduce the volume of the dust collector. Because the Flumes filter felt has high mechanical strength, good wear resistance and folding resistance, it can be used normally under the filtering wind speed of more than lm/min, so the wind speed can be selected higher. The size and filtration area of ​​the dust collector can be smaller to save energy.
6. Flumes high temperature filter material is cheap, users should accept
Because the Flumes filter material is a composite material of glass fiber and various chemical fibers, the manufacturing cost is 50-60% of the same type of imported high-temperature resistant chemical filter material, which can greatly save the use cost. At present, Flumes filter materials have been widely used in major steel mills, such as: Shougang, Laiwu Steel, Jinan Steel, Dagang, Pangang, etc., which have been recognized and praised by users.
This article is taken from the "Huilong Filtration Group" http://
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Screwdriver Types,Offset Screwdriver,Mobile Screwdriver,Magnetic Screwdriver
henan horn tools co.,ltd. , https://www.hornhandtools.com