The ductile iron pipe fittings manufactured by Judibode foundry are mainly used for transferring the drinkable water. With special ductile iron material, this series of pipe fittings can also be used for transferring the acid in the acid plant or transferring slurry. Judibode Foundry has been supplying Pipe Fittings for over 5 years and Pipe Fitting surface shall be smooth and free from sand holes, blow holes, distortion or any other defects. Hundreds of patterns are ready.
2), Material
Ductile Iron
Grey Iron
3), Standards
ISO2531, ISO4422, EN545, EN598, BS4772
4), coating
Fusion bonded epoxy coating;
Cement lining inside and zinc primer and bitumen painting outside;
Bitumen painting inside and outside; Red anti-rust coating.
5), Process
Automatics machine lines
Resin Sand
Molding Boards
Green Sand with hand molding
6), Inscription Style
JUDIBODE
As per customers' requests
7), Packing
Wood pallet
Steel pallet
As per customers' requirements
8), Inspection
Foundry in-house
100% Pressure test
Third Party inspection available upon request
More information is available upon receipt of your enquiry. Accessories such as gaskets, bolts and nuts available upon request
Hope we can cooperation in near future.
Our foundry photos are as below
General specification for our ductile iron pipe fittings are as below
| Standard | EN545/EN598/ISO2531/AWWAC110&153/AS/NZS2280 |
| Paint/coating | Bitumen inside,zinc and bitumen outside/Highe Al bitumen inside,zinc and bitumen outside/FBE coating no less than 250um |
| Accessories | gasket,bolt,nuts and washers are available upon request |
| Export countries | Europe,America,Middle east and africa |
Â
Holland fence also named swallowtail post fence.
Holland Wire Mesh is made with low carbon steel wire after welding . It has the features such as high stregth, good steel , beautiful appearance and easy installation .
They are widely used as fence in green ground, gardens, office fields, roads, airports and harbors.
Holland fence Common Specifications:
Opening: 50×50mm/50×100mm/50×150mm
Wire diameter with coating: 2.1mm/2.3mm/2.5mm/2.8mm/3.0mm
Length: 12-30m
Height: 1-2mFence Post: Diameter 30 and 48mm, wall thickness 0.8 to 1.5mm.
Holand fence Originated from Europe, made of Q195 low carbon steel wire through the machine welding
Holand fence surface treatment : PVC powder coated or PE, PP sulfide-protected welding.
Holland Fencing Applications: highway, railway, airport, stadium golf course, residential area, port, oil stations, farming, animal husbandry and the mountains.
PVC Coated Wire Fence,Holland Wire Mesh,Holland Wire Fence,PVC Coated wire mesh
Hebei Yishen Wire Mesh Products Co., Ltd , http://www.ysgabionmesh.com