Home>Bearing knowledge> Reasonable dosage of smooth grease |
Reasonable amount of smooth grease
Source: China Bearing Network Time: 2014-10-30
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Refer to the following guidelines for the amount of smooth grease filled in rolling bearings:
(1) The general bearing should not be filled with smooth grease; it can be loaded into the inner cavity of the bearing 1/2~3/4.
(2) The horizontal bearing fills 2/3~3/4 of the inner cavity space,
(3) The bearing of the straight device fills 1/2 of the inner cavity space (upper side); 3/4 (lower side),
(4) In a simple polluted environment; for low or medium speed bearings; fill all the space in the bearing box,
(5) High-speed bearings should be placed in high-quality smooth oil before loading. Generally, they should be soaked in the base oil with smooth grease; avoid bearing burnout due to lack of smooth grease on the collision surface during start-up.
Smooth grease loading; generally can be budgeted as follows:
V (cm3) = 0. 01 * d (inner diameter mm) * B (width mm)
Recommend to friends comments close window
Bearing related knowledge |
Bearing information Analysis of the causes of FAG bearing attack SKF tapered bore bearing device method sliding bearing grease selection considerations analysis of interspersed roller bearings |
This article links to http://
Please indicate the bearing network http://
Previous:NTN Bearing Code Encyclopedia Next:The resolution factor of NTN bearing ring affected by cyclic load
Camping Light,Camping Lamp,Rechargeable Camping Lights,Torch Lanterns,LED Tent Light
Yuyao Flylit Appliance Co.,Ltd , https://www.yyflylit.com