Means one: wall paint
Steal workers index: ★ ☆
Phenomenon: Latex paint is the most common wall decoration material at present. In concrete construction, it can be painted, rolled or sprayed. For interior decoration of a room, general latex paint needs to be coated twice or more to qualify. If the workers are not serious or perfunctory during the construction, there will often be color differences, especially with darker emulsion paints.
Reminder: Before the use of latex paint to add a certain amount of water, deployment of a good latex paint to be used up once. Paints of the same color are also best painted once. If the wall needs to be repaired after construction, the whole wall should be repainted again.
Means II: Sewer pipeline stealing index: ★ ★
Phenomenon: A friend who has had construction experience, has encountered such a situation: the construction is completed, on the surface it seems that there is no problem in the renovation project, in full compliance with their own requirements, but once the acceptance is completed, but found the kitchen and bathroom Poor water? In fact, this is caused by the construction team cutting corners in the project. In order to save time and money, a few construction teams may pour concrete blocks containing a lot of cement and sand directly into the sewers. This will cause poor drainage pipes in the future. problem.
Reminder: We must strictly supervise and warn the construction team in advance that we cannot use the sewer as garbage road. After the construction of the waterway is completed, all the basins, basins and bathtubs are filled with water to see if the water is unobstructed and if there is any leakage of the pipeline. After all these steps have been completed, acceptance can be considered.
Means three: wire connector stealing index: ★ ★ ☆
Phenomenon: This is also a very stealthy jerry, usually after the completion of the renovation, after the completion of the renovation, consumers in the use of electrical appliances, especially some of the more power-hungry water heaters, air conditioners, etc., switch, socket fever Even burned, some inexperienced consumers often think that this is caused by high-power electrical appliances. Actually, this is not the case. In such a situation, it is very likely that electricians do not follow construction requirements when installing sockets, switches and lamps. Caused by wiring.
Reminder: The summer is coming again, the use of high-power electrical appliances: air conditioners is inevitable, so in the construction must supervise the electrician in strict accordance with the operating procedures for construction, after all switches, sockets installed, be sure to carry out the actual Use it to see if there is fever in these parts to prevent unnecessary losses during the use of electrical appliances.
Means four: wall tiles to steal the work index: ★ ★ ★
Phenomenon: Paving tiles is a technical job. If the workers cut corners, it is easy to see problems such as hollowing of the tiles and misalignment of the joints. This will not only reduce the overall aesthetics of the home, but also cause the tiles to crack and crush. In addition, there are also particular concerns about cements and adhesives used for paving tiles. If the mix ratio is unreasonable, there are problems such as falling off.
Reminder: Wall tiles should be flat and firm, with clear patterns, no dirt and grout marks, the same surface color, uniform joints, no cracks, missing corners, and lack of edges, and local empty drums must not exceed 5% of the total.
Means 5: Wall nicking stealing index: ★★★☆
Phenomenon: Today's home renovations generally choose to bury underground pipelines in order to maintain the simplicity and safety of the living environment. To bury underground pipelines, it is necessary to grooving walls and floors before embedding. A few workers perform barbaric construction during slotting operations, which will not only damage the building load-bearing structures, but also cause damage to other nearby pipelines.
Reminder: Before construction, we must reconfirm the direction and location of the pipeline with the construction team leader. For different wall structures, the requirements for slotting are not the same: the walls of the load-bearing wall in the house are not allowed to be slotted, and the wall with the insulating layer is easy to cause cracking on the surface after being slotted, and on the ground Slot, be careful not to damage the floor and cause trouble for the downstairs tenants
Means six: seam modification stealing index: ★ ★ ★ ★
Phenomenon: In places where walls meet doors and windows, and where two different colors of paint are docked, it is not easy to be noticed. Therefore, these places are exactly what the workers often perfunctory. You often see mixed paints between latex paint and wood, and various problems at the joints.
Reminder: It is very important to deal with joints. You must supervise the workers to do serious construction. If there are two colors of paint on the wall facing each other, it is necessary to apply adhesive tape on the edge of the first color during construction, and then apply another color of paint on it, so that the construction is completed. After tearing off the tape, the entire seam can be very neat.
Means 7: Wire Pipe Stealing Index: ★★★★☆
Phenomenon: In home renovation construction, almost all the wires are worn in PVC pipes and buried in the walls. Therefore, after the electric wires were put into the PVC pipes, consumers couldn't see them at all, and they could not pass the inspection and acceptance. If the worker is not careful in the operation, it will cause the wire to kink in the tube, causing electricity hazards. If workers deliberately cut corners, they will use wires with joints or put several wires in the same PVC pipe. If problems occur, it will be difficult to replace them.
Reminder: It is best for consumers to purchase the wires themselves, then supervise the workers' operations at the site, and check the power supply after installation. In addition, consumers must allow the decoration company to leave a "pipeline map." When the electrician had just buried the wires in the wall, he could number the walls and draw a floor plan. Then he used the strokes to draw the direction of the wires and the specific location of the wires, indicating the position on the floor, the ground and the adjacent wall. In particular, the position of the joints of the pipelines should be marked so that in the event of a fault, the line position can be found immediately.
Means 8: Facet Handling Stealing Index: ★★★★☆
Phenomenon: The so-called “small face†is a small place that some consumers can't see but does not pay much attention to, such as the upper edge of the door, the underside of the window sill, and so on. Some workers here will cut corners and materials, or even not. Do any processing.
Reminder: Always keep in mind that there are 6 planes for any object. Don't ignore any details when checking the quality of the project.
Means 9: Ground Leveling Stealing Index: ★★★★★
Phenomenon: In some projects where there is a suspicion of cutting corners, it is often found that there is a phenomenon of tilting at the edge of the wooden floor of the home, especially near the corners of the wall. What causes this problem? An important reason for wood floor tilting is due to problems with floor leveling before laying. Because some houses are not well-grounded, they need to be re-leveled before laying the floor. If the workers are not careful or deliberately rigged, it will cause “more and more inconveniencesâ€, posing a hidden danger to the floor tilting in the future.
Reminder: Before ground leveling, ground surface treatment must be done first, and then use cement mortar to level the ground. After the cement is dry, determine the flatness of the entire floor using a dedicated level ruler, and then proceed to the next step.
Means 10: Substrate Handling Stealing Index: ★★★★★
Phenomenon: Before painting latex paint and paving the wall and floor tiles, we must do a good job on the surface treatment of the wall or the ground. For the new house, the substrate treatment generally only needs to be polished with coarse sandpaper, and it is not necessary to eradicate the original paint layer. However, the walls of ordinary old houses need to be removed before the next process can be carried out. Some workers, due to the lack of knowledge of the householder about the knowledge in this area, are cutting corners in this area during construction. The consequences of this situation are that unevenness of the wall is caused, there is a color difference after the paint is applied, and the emulsion paint is discolored. Cracks or even peeling, or tiles stuck loosely.
Reminder: In the paving construction of tiles, you should pay attention that the tiles can not be directly laid on the surface of lime mortar, lime paste, paper lime plaster, hemp stone mortar and latex paint. layout. Bonding pastes used between tiles and substrates should be formulated in strict accordance with the construction standards and proportions, using the specified grades of cement and adhesive materials, and they cannot be randomly deployed. When applying latex paint, you must pay attention to whether the shading of the wall putty is even and smooth, whether the sanding and rolling are in place. In addition, you should pay attention to whether the latex paint is properly proportioned and there is no excessive water added.
Steal workers index: ★ ☆
Phenomenon: Latex paint is the most common wall decoration material at present. In concrete construction, it can be painted, rolled or sprayed. For interior decoration of a room, general latex paint needs to be coated twice or more to qualify. If the workers are not serious or perfunctory during the construction, there will often be color differences, especially with darker emulsion paints.
Reminder: Before the use of latex paint to add a certain amount of water, deployment of a good latex paint to be used up once. Paints of the same color are also best painted once. If the wall needs to be repaired after construction, the whole wall should be repainted again.
Means II: Sewer pipeline stealing index: ★ ★
Phenomenon: A friend who has had construction experience, has encountered such a situation: the construction is completed, on the surface it seems that there is no problem in the renovation project, in full compliance with their own requirements, but once the acceptance is completed, but found the kitchen and bathroom Poor water? In fact, this is caused by the construction team cutting corners in the project. In order to save time and money, a few construction teams may pour concrete blocks containing a lot of cement and sand directly into the sewers. This will cause poor drainage pipes in the future. problem.
Reminder: We must strictly supervise and warn the construction team in advance that we cannot use the sewer as garbage road. After the construction of the waterway is completed, all the basins, basins and bathtubs are filled with water to see if the water is unobstructed and if there is any leakage of the pipeline. After all these steps have been completed, acceptance can be considered.
Means three: wire connector stealing index: ★ ★ ☆
Phenomenon: This is also a very stealthy jerry, usually after the completion of the renovation, after the completion of the renovation, consumers in the use of electrical appliances, especially some of the more power-hungry water heaters, air conditioners, etc., switch, socket fever Even burned, some inexperienced consumers often think that this is caused by high-power electrical appliances. Actually, this is not the case. In such a situation, it is very likely that electricians do not follow construction requirements when installing sockets, switches and lamps. Caused by wiring.
Reminder: The summer is coming again, the use of high-power electrical appliances: air conditioners is inevitable, so in the construction must supervise the electrician in strict accordance with the operating procedures for construction, after all switches, sockets installed, be sure to carry out the actual Use it to see if there is fever in these parts to prevent unnecessary losses during the use of electrical appliances.
Means four: wall tiles to steal the work index: ★ ★ ★
Phenomenon: Paving tiles is a technical job. If the workers cut corners, it is easy to see problems such as hollowing of the tiles and misalignment of the joints. This will not only reduce the overall aesthetics of the home, but also cause the tiles to crack and crush. In addition, there are also particular concerns about cements and adhesives used for paving tiles. If the mix ratio is unreasonable, there are problems such as falling off.
Reminder: Wall tiles should be flat and firm, with clear patterns, no dirt and grout marks, the same surface color, uniform joints, no cracks, missing corners, and lack of edges, and local empty drums must not exceed 5% of the total.
Means 5: Wall nicking stealing index: ★★★☆
Phenomenon: Today's home renovations generally choose to bury underground pipelines in order to maintain the simplicity and safety of the living environment. To bury underground pipelines, it is necessary to grooving walls and floors before embedding. A few workers perform barbaric construction during slotting operations, which will not only damage the building load-bearing structures, but also cause damage to other nearby pipelines.
Reminder: Before construction, we must reconfirm the direction and location of the pipeline with the construction team leader. For different wall structures, the requirements for slotting are not the same: the walls of the load-bearing wall in the house are not allowed to be slotted, and the wall with the insulating layer is easy to cause cracking on the surface after being slotted, and on the ground Slot, be careful not to damage the floor and cause trouble for the downstairs tenants
Means six: seam modification stealing index: ★ ★ ★ ★
Phenomenon: In places where walls meet doors and windows, and where two different colors of paint are docked, it is not easy to be noticed. Therefore, these places are exactly what the workers often perfunctory. You often see mixed paints between latex paint and wood, and various problems at the joints.
Reminder: It is very important to deal with joints. You must supervise the workers to do serious construction. If there are two colors of paint on the wall facing each other, it is necessary to apply adhesive tape on the edge of the first color during construction, and then apply another color of paint on it, so that the construction is completed. After tearing off the tape, the entire seam can be very neat.
Means 7: Wire Pipe Stealing Index: ★★★★☆
Phenomenon: In home renovation construction, almost all the wires are worn in PVC pipes and buried in the walls. Therefore, after the electric wires were put into the PVC pipes, consumers couldn't see them at all, and they could not pass the inspection and acceptance. If the worker is not careful in the operation, it will cause the wire to kink in the tube, causing electricity hazards. If workers deliberately cut corners, they will use wires with joints or put several wires in the same PVC pipe. If problems occur, it will be difficult to replace them.
Reminder: It is best for consumers to purchase the wires themselves, then supervise the workers' operations at the site, and check the power supply after installation. In addition, consumers must allow the decoration company to leave a "pipeline map." When the electrician had just buried the wires in the wall, he could number the walls and draw a floor plan. Then he used the strokes to draw the direction of the wires and the specific location of the wires, indicating the position on the floor, the ground and the adjacent wall. In particular, the position of the joints of the pipelines should be marked so that in the event of a fault, the line position can be found immediately.
Means 8: Facet Handling Stealing Index: ★★★★☆
Phenomenon: The so-called “small face†is a small place that some consumers can't see but does not pay much attention to, such as the upper edge of the door, the underside of the window sill, and so on. Some workers here will cut corners and materials, or even not. Do any processing.
Reminder: Always keep in mind that there are 6 planes for any object. Don't ignore any details when checking the quality of the project.
Means 9: Ground Leveling Stealing Index: ★★★★★
Phenomenon: In some projects where there is a suspicion of cutting corners, it is often found that there is a phenomenon of tilting at the edge of the wooden floor of the home, especially near the corners of the wall. What causes this problem? An important reason for wood floor tilting is due to problems with floor leveling before laying. Because some houses are not well-grounded, they need to be re-leveled before laying the floor. If the workers are not careful or deliberately rigged, it will cause “more and more inconveniencesâ€, posing a hidden danger to the floor tilting in the future.
Reminder: Before ground leveling, ground surface treatment must be done first, and then use cement mortar to level the ground. After the cement is dry, determine the flatness of the entire floor using a dedicated level ruler, and then proceed to the next step.
Means 10: Substrate Handling Stealing Index: ★★★★★
Phenomenon: Before painting latex paint and paving the wall and floor tiles, we must do a good job on the surface treatment of the wall or the ground. For the new house, the substrate treatment generally only needs to be polished with coarse sandpaper, and it is not necessary to eradicate the original paint layer. However, the walls of ordinary old houses need to be removed before the next process can be carried out. Some workers, due to the lack of knowledge of the householder about the knowledge in this area, are cutting corners in this area during construction. The consequences of this situation are that unevenness of the wall is caused, there is a color difference after the paint is applied, and the emulsion paint is discolored. Cracks or even peeling, or tiles stuck loosely.
Reminder: In the paving construction of tiles, you should pay attention that the tiles can not be directly laid on the surface of lime mortar, lime paste, paper lime plaster, hemp stone mortar and latex paint. layout. Bonding pastes used between tiles and substrates should be formulated in strict accordance with the construction standards and proportions, using the specified grades of cement and adhesive materials, and they cannot be randomly deployed. When applying latex paint, you must pay attention to whether the shading of the wall putty is even and smooth, whether the sanding and rolling are in place. In addition, you should pay attention to whether the latex paint is properly proportioned and there is no excessive water added.
Construction Acceptance Paint Lacquer Paint Coatings Cement Electrical Flooring Tiles Doors Bathroom Tiles Colors Bathroom Tiles Monolithic Toilets Bathroom Doors Bathroom Tiles Tiles Tile Floor Tiles Kitchen Tiles
Southeast Aluminum Sheet Co., Ltd. , http://www.jsaluminumplates.com