1. Is it because the gas consumption is too large and the gas consumption exceeds the displacement?
Second, if the screw-type air compressor does not inflate the gas storage tank, check whether there is excessive dirt and blockage in the oil-water separator and the air filter and the management. If it is clogged, you need to remove the dirt.
3. The barometric pressure gauge indicates that the air pressure cannot reach the starting pressure value, or it may be that the barometer fails;
4. Whether the air compressor valve is leaky, whether the spring is too soft or broken, whether the cylinder head has carbon deposition, sand holes, whether the pad is damaged, whether the cylinder body and the piston ring have excessive wear; replace or repair according to the fault found. Damaged parts.
Fifth, the intake valve is not a fault, the solenoid valve is not a malfunction.
Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.
The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and / or elevated temperatures. The smooth transition fromFlange thickness to pipe or fitting wall thickness effected by the taper is extremely beneficial, under conditions of repeated bending, caused by line expansion or other variable forces.
These Welding Neck Flange are bored to match the inside diameter of the mating pipe or fitting so there will be no restriction of product flow. This prevents turbulence at the joint and reduces erosion. They also provide excellent stress distribution through the tapered hub and are easilyradiographedfor flaw detection.
This Welding Neck Flange will be welded to a pipe or fitting with a single full penetration, V weld (Buttweld).
Welding Neck Flange
Welding Neck Flange,Carbon Steel Weld Neck Flange,Class150 Welding Neck Flange,Stainless Steel Welding Neck Flange
Shijiazhuang Huize Pipe Fitting Co., Ltd. , https://www.huizegd.com