After the three-layer solid wood composite floor is laid, it must be used for at least 24 hours before use, otherwise it will affect the effect of the three-layer solid wood composite floor. Good floor is like a good car, it needs maintenance. In the daily renovation project, due to the construction period, the floor is usually required to be installed earlier, so the floor is often damaged by other construction teams.
It often happens that the white spots on the floor are all along the wall, because the paint is dropped on the floor when painting, and then scraped off with sharp tools; the damage of the living room floor is more serious than the bedroom, because the decoration workers tend to decorate The material is in the living room. Therefore, it is recommended to perform floor maintenance two days before installing the furniture after installing the floor.
Generally, the three-layer solid wood composite floor has poor water resistance and should not be wiped with a damp cloth or water to avoid tarnishing. It is recommended to use professional floor care products that meet health and environmental standards for floor maintenance.
In daily life, you can also choose a general cleaning and maintenance product to maintain the three-layer solid wood composite floor according to your family's economic situation. For details, please refer to the following method.
First, the temperature
In the daily use of the floor, it is desirable to keep the indoor temperature between 18 ° C and 22 ° C, and the optimum air humidity is between 45% and 65%.
Second, humidity
The humidity in the room should not be too large, keep the floor dry and smooth, and use daily cleaning with a wringed cotton mop: in case of stubborn stains, wipe with a neutral cleaning solvent and then wipe with a wrung cotton mop. Do not use Scrub with an organic solvent such as acid, alkaline solvent or gasoline.
Third, the use of attention
During daily use, care should be taken to avoid scratching the floor with hard objects such as metal sharps, glass tiles, studs, etc.; do not expose the floor to open flames or place high-power electric heaters directly on the floor; do not place strong acid and alkali on the floor. Sexual substances; long-term flooding is absolutely forbidden.
Fourth, maintenance
In order to maintain the aesthetics of the floor and extend the life of the paint, it is recommended to maintain it once a year with liquid maintenance fluid. Wipe the floor clean before maintenance, then apply a layer of maintenance solution evenly on the surface. After a while, wipe it with a soft cloth until it is smooth and bright.
If large-area flooding occurs inadvertently or if it is partially soaked in water for a long time, if it is stagnant, it should be dried in a dry cloth and allowed to dry naturally. It is strictly forbidden to use electric heater to dry or expose to sunlight.
Prolonged exposure to strong sunlight, or rapid rise and fall of temperature in the room may cause premature aging of the three-layer parquet, which should be avoided.
If the installed place is not lived, keep the indoor air circulation, and do not cover it with plastic paper or newspaper, so as to avoid the sticky and tarnished surface paint film.
Clean the floor regularly, vacuum, and prevent sand or frictional dust from accumulating and scratching the floor surface. A doormat can be placed outside the door to prevent sand or frictional dust from being carried indoors. You can usually wipe the floor with a wrung cotton swab. Do not wipe the floor with a drip mop or a corrosive liquid such as soapy water or gasoline.
Stainless Steel Coil,Carbon Steel Coil,Stainless Steel Sheets Plates,Stainless Steel Strip Coils
Shandong Xinsuju Steel Co.,Ltd. , https://www.sawlpipe.com