According to survey data, consumers in the city’s choice of flooring materials account for 81% of wooden flooring, while laminate flooring and engineered wood flooring are more preferred, accounting for 31% of the total. At present, the floor is divided into four types of flooring: solid wood, solid wood composite, reinforced composite and bamboo, while wood and composite have different classifications. When consumers enter the building materials store, they will be plagued by hundreds of different types of floors. Salespeople will also make every effort to educate them. From quality, price to service, and endless publicity, most consumers will find it hard to understand. . Therefore, it is necessary to distinguish the types of floors, regardless of the popularity, and to select the products that are suitable for them.
Category 4 floor price
Solid wood flooring prices are higher
Solid wood flooring is roughly divided into hardwood flooring and cork flooring. Among them, hardwood floors have a hard texture, delicate texture, good abrasion resistance, elasticity, dryness, cleanliness, and beauty. The woods used are ash, birch, walnut, oak, jellyfish, beech, etc. Some of the wood floors used in the wood are cherry, longan, citron, etc., while the cork flooring is mainly pine, fir, cassia, hemlock, etc.? Snow, cypress wood, warm and elastic. However, the wear resistance is poor. If it is not dried enough, it will be more easily deformed and cracked.
In general, although the solid wood flooring has the advantages of good foot feeling, natural texture, color, and good heat preservation, the hardness is slightly inferior.
Large price difference of parquet
Solid wood composite floor is divided into the following three types: three-layer solid wood composite flooring made of three different types of wood. The top layer is made of hard wood such as beech, birch, beech, cherry, and ash, and the middle and bottom layers are used. Soft wood, such as the use of pine as the center of the core board, the flexibility of solid wood flooring, and relatively reduced the cost.
Multi-layer solid wood composite floor, with multi-layer plywood as the substrate, the surface layer of hardwood veneer, laminated by urea-formaldehyde resin.
New solid wood composite flooring, the use of hard wood surface is basically the same as the first, the middle layer and the bottom layer of the use of medium density fiberboard or high density fiberboard, the effect and durability are similar to the three-tier solid wood flooring.
This kind of floor has a degree of abrasion resistance between that of a laminate floor and a solid wood floor, and the hardness is lower than that of a hardwood floor and a solid wood floor.
Strengthen the most affordable floor prices
The laminate flooring is composed of three layers of materials. The middle layer is a density fiberboard. It has strong impact resistance and is not easily deformed. The bottom layer is a balance layer and plays a damp-proof role. The surface layer is covered with a melamine wear layer on the decorative layer of the printing. The abrasion resistance is far. Higher than wood, good flame retardant, and anti-corrosion, moisture-proof, anti-mite.
Compared with the above two floor types, the surface of the laminate flooring can print a variety of woodgrains and is beautiful. Paving is quick and easy, saving wood. But the flexibility is worse than solid wood flooring. The biggest advantage is that the price is the cheapest.
Bamboo flooring cost-effective
Bamboo flooring is a floor made of bamboo after processing. It is rich in the natural beauty of natural materials and has the advantages of wear resistance. It can also prevent squatting and resist earthquakes. Bamboo flooring is cool in winter and cool in summer, moisture-proof and wear-resistant, and easy to use. It can reduce the use of wood and protect the environment.
Authoritative statement: rational paving use more peace of mind
At present, there are bottlenecks in floor innovation and the homogenization of products is becoming more and more serious today. Consumers should put more effort into the paving stage of flooring.
There has always been a saying in the flooring industry that wood floors are "seven-packs of three-part floorboards," which means that the quality of the installation determines 70% of the floor quality. The unsatisfactory use of the floor and, to a great extent, caused by the unsatisfactory floor covering, has caused the floor to become the biggest problem that restricts floor use.
To circumvent unpleasant floor repairs, it is more important to do well in sales. Ruijia floor responsible person told reporters that before the installation of the staff, they must perform four different aspects of the measurement preparation work, this benefit can be greatly enhanced for the later construction process accuracy and precision, and can effectively detect the ground The specific degree of the five major issues such as "sand, tide, concave, convex, and split".
In addition, the staff must also carefully examine the three aspects of ground flatness, ground firmness, and non-wet ground.
Consumer Tips: Picking the floor to master the seven principles
Since wear resistance is not the most important indicator for buying flooring, how should consumers choose wood floors? Gao Zhihua, Secretary General of the China Flooring Alliance, gave seven recommendations for floor selection:
1. Strengthen the wood floor to buy a certain well-known enterprise products. The product must have the inspection report of the national authoritative department, and the product packaging must have complete identification.
2. Look at the wear resistance. Household floor wear-resisting rotations are usually more than 4,000 rpm, and usually more than 9000 rpm are used in public places. The decorative layer is resistant to light.
3. Check the formaldehyde release limit. The formaldehyde emission in laminate flooring is ≤1.5mg/L.
4. Look at the substrate density. The density of the base material of laminate flooring should be 0.84-0.9/cm3. It is not suitable for the smoke density to be too low or too high.
5. Look at water resistance. The index value is high, the water resistance is poor, and it is easy to cause dimensional changes in a wet environment. The water absorption thickness expansion rate should be ≤ 2.5%.
6. Look at the processing density. Observe whether the product is smooth and smooth, whether the tongue and groove are suitable or not, and should not be too loose or too tight.
7. Sales + pavement + warranty. "Buying" and "shopping" do not divide the family, reach the paving acceptance criteria, and have a complete after-sales service guarantee.
Floor purchase decorative formaldehyde door prices
Huawei Aluminum Co., Ltd. , http://www.hnaluminumcoil.com